When planning for a logically partitioned system,which of the following should be used as part of a review to ensure that each partition has the required resources? ()A、Use the Workload Estimator capacity planning tool.B、Use prtconf output from legacy sys

题目

When planning for a logically partitioned system,which of the following should be used as part of a review to ensure that each partition has the required resources? ()

  • A、Use the Workload Estimator capacity planning tool.
  • B、Use prtconf output from legacy systems.
  • C、Use the LPAR Validation Tool.
  • D、Use Performance Management Services.

相似考题
更多“When planning for a logically partitioned system,which of the following should be used as part of a review to ensure that each partition has the required resources? ()A、Use the Workload Estimator capacity planning tool.B、Use prtconf output from legacy sys”相关问题
  • 第1题:

    A customer has two Power 770 systems with 4 enclosures each.  Thirty two cores and 1TB of memory are activated on each system.  Each system has 3 database partitions and each partition has 10 cores and 300GB of memory.   Which solution will provide automated recovery of unplanned outages at least cost?()

    • A、Purchase PowerVM Enterprise Edition.Use System Director to automate Live Partition Mobility to recover from partition failure
    • B、Create additional shared processor partitions as standby nodes.Use PowerHA SystemMirror to activate and use CoD resources when a failover occurs
    • C、Purchase an additional 32-core Power 750 with PowerHA SystemMirror Standard Edition.Use the new system as standby node with the XD component of PowerHA
    • D、Purchase an additional Power 770 system.Locate production and standby database partitions on each system.Use DB2 pureScale to provide automated partition monitoring and failover

    正确答案:B

  • 第2题:

    A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console (HMC). For operational reasons, it must be disconnected from the HMC and configured as a new development system.  How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager (IVM) on this Power System? ()

    • A、 Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.
    • B、 Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.
    • C、 Delete all the existing LPARs, create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.
    • D、 Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created, which will own all system resources.

    正确答案:D

  • 第3题:

    A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system. What information is important to analyze when deciding how to design the new machine using the System Planning Tool?()

    • A、 vmstat and iostat data from the older machines 
    • B、 The number of CPUs that were installed in the original machines 
    • C、 Data from Workload Estimator (WLE) and IBM Performance Management (PM) 
    • D、 Performance data that is collected from the new system after it has been put into production

    正确答案:C

  • 第4题:

    A customer is installing an HMC-managed Power 720 with two partitions, one for Production the other for Testing. They plan to use the Testing partition only occasionally and want to minimize hardware. Which of the following meets these requirements?()

    • A、Create a system profile for each partition. Assign all needed resources as 'required'.
    • B、Define all system resources as 'desired' on the Testing partition. Activate only as needed.
    • C、Create two shared processor pools. Assign the minimal I/O resources required for each partition to the shared pools.
    • D、Create both partitions with minimal 'required' resources, and optional resources as 'desired'. Activate each partition as necessary.

    正确答案:D

  • 第5题:

    Company.com is ordering a new p5-570 and planning for the option of using Capacity on  Demand to activate additional resources in the future. Which of the following is a prerequisite to support the addition of CPUs or memory without an outage?()

    • A、Use Micro-Partitioning
    • B、Configure a Virtual I/O Server
    • C、Configure dynamic logical partitions
    • D、Activate Advanced POWER Virtualization

    正确答案:C

  • 第6题:

    Which statements are true regarding system-partitioned tables?()  

    • A、 Only a single partitioning key column can be specified.
    • B、 All DML statements must use partition-extended syntax.
    • C、 The same physical attributes must be specified for each partition.
    • D、 Unique local indexes cannot be created on a system-partitioned table.
    • E、 Traditional partition pruning and partitionwise joins are not supported on these tables.

    正确答案:D,E

  • 第7题:

    You are planning the configuration of SQL1.You need to use the most appropriate Windows account for the SQL Server service. Which account should you use?()

    • A、a domain user account
    • B、a local user account
    • C、the NETWORK SERVICE account
    • D、the LOCAL SYSTEM account

    正确答案:A

  • 第8题:

    You are planning to deploy Windows 7 Enterprise to all of your company’s client computers. You have the following requirements:  Create two custom partitions on each client computer’s hard disk, one for the operating system and the other for data.  Automatically create the partitions during Windows Setup.    You need to design an image that meets the requirements.   What should you do?()

    • A、Use Windows PE to create the partitions. Install Windows 7 on the first partition.
    • B、Use Windows System Image Manager (Windows SIM) to specify the partition configuration.
    • C、Use Disk Management to create the two partitions on the hard disk.
    • D、Use SysPrep to create the two partitions during Windows Setup.

    正确答案:B

  • 第9题:

    All client computers in your network run Windows XP. Some of the computers are part of a secure network. Some of the computers connect to the network by using virtual private networking (VPN). You are planning to deploy Windows 7.   You have the following requirements:   Use a dedicated server for deployment.  Use a single operating system image for deployment.   Ensure that you can use removable media to deploy the image.   Ensure that you can select which applications are installed onto a client computer at the time of deployment.   You need to design a deployment strategy that meets the requirements.   What should you do?()

    • A、 Using a Windows PE boot media, use ImageX to apply the image from a network share to the client computers.
    • B、 Use System Center Configuration Manager 2007 R2 to perform a zero-touch installation.
    • C、 Use the Microsoft Deployment Toolkit to perform a lite-touch installation.
    • D、 Use Windows Deployment Services on a network server to deploy Windows 7 by using an install image.

    正确答案:C

  • 第10题:

    单选题
    Company.com wishes to use HACMP on two IBM eServer pSeries servers. During the planning  session, it was decided to use the native serial ports s1 or s2 for a non-IP heartbeat network.  What should be done to ensure the serial network will function with HACMP heartbeats?()
    A

     Use either s1 or s2 port configured as a TTY interface with a NULL Modem cable.

    B

     Use the s2 serial port on each system configured as a TTY interface with a NULL modem cable.

    C

     Use the s1 port on each system configured as a TTY interface with a standard serial modemcable.

    D

     Verify with IBM support which native serial ports for the server model can be used for HACM  pheartbeats.


    正确答案: B
    解析: 暂无解析

  • 第11题:

    单选题
    A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system. What information is important to analyze when deciding how to design the new machine using the System Planning Tool?()
    A

     vmstat and iostat data from the older machines 

    B

     The number of CPUs that were installed in the original machines 

    C

     Data from Workload Estimator (WLE) and IBM Performance Management (PM) 

    D

     Performance data that is collected from the new system after it has been put into production


    正确答案: A
    解析: 暂无解析

  • 第12题:

    单选题
    A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console (HMC). For operational reasons, it must be disconnected from the HMC and configured as a new development system.  How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager (IVM) on this Power System? ()
    A

     Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.

    B

     Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.

    C

     Delete all the existing LPARs, create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.

    D

     Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created, which will own all system resources.


    正确答案: D
    解析: 暂无解析

  • 第13题:

    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?()

    • A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
    • B、Use DLPAR to move resources from the test LPAR to training when training is active
    • C、Install Partition Load Manager to share resources between the test and training environments
    • D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

    正确答案:D

  • 第14题:

    A graphics card has been added and the system rebooted. When running the lsdev-Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?()

    • A、Reboot system sing the mkdev -l command.
    • B、Install device support suing the cfgmgr -i command.
    • C、Use the SMIT console to redirect the console.
    • D、Use SMIT devices and choose the correct adapter.

    正确答案:B

  • 第15题:

    Company.com has a single pSeries server with two shared processor logical partitions. The first partition has peak resource requirements during weekdays. The second partition has peak resource requirements during weekends. During the peak times, the total workload between the partitions does NOT exceed the capacity of the server. However, the partitions are not able to utilize the full capacity of the system during peak times, because the necessary CPU and memory resources are not always allocated to the busiest partition. Which of the following options would best balance these resources?()

    • A、Configure AIX Workload Manager
    • B、Configure Partition Load Manager
    • C、Configure eServer Workload Manager
    • D、Use DLPAR from the HMC

    正确答案:B

  • 第16题:

    How can resource allocations for an active partition on a Power 750 be changed immediately and permanently?()

    • A、Use Capacity on Demand to add the resources.
    • B、Use DLPAR to add the resources and select the 'permanent' option.
    • C、Use DLPAR to add the resources, and change the partition profile.
    • D、Use an Operating System command to permanently request the resources.

    正确答案:C

  • 第17题:

    Companycom is planning a p5 595 running AIX 5L 5.3 LPARs. They would like to design the system using physical resources with maximum resource efficiency. One LPAR requires a peak load of 30 processors during the week with a low of 1 processor required on the weekend. The other LPAR requires only a single processor most of the time, but needs at least 24 processors at the beginning of the weekend to finish its weekly processing in the window allocated. Which of the following solutions is most appropriate to continuously maximize resource use for these two LPARs?()

    • A、Dynamic LPAR
    • B、Workload Manager
    • C、Partition Load Manager
    • D、Shared Processor Pools

    正确答案:C

  • 第18题:

    Your network has a single domain with 1,000 client computers that run Windows Vista. All client computers are members of the domain.   You are planning to deploy Windows 7.   You need to create a report that shows hardware and device compatibility on all client computers.    You need to perform this action without installing any additional software on the client computers.   Which tool should you use?()

    • A、System Center Capacity Planner
    • B、System Center Configuration Manager
    • C、Microsoft Assessment and Planning Toolkit
    • D、Windows Performance Monitor Data Collector Sets

    正确答案:C

  • 第19题:

    You are planning to upgrade Internet Explorer.   You have the following requirements:   Create a report that identifies which computers are successfully upgraded. Do not install additional software on the client computers.   You need to design a deployment method that meets the requirements.   What should you do?()

    • A、Use Internet Explorer Administration Kit (IEAK) and Group Policy.
    • B、Use Microsoft System Center Configuration Manager.
    • C、Use Windows Server Update Services (WSUS).
    • D、Use Microsoft System Center Essentials.

    正确答案:C

  • 第20题:

    Your company is planning to deploy Windows 7 to all client computers.   You have the following requirements:   Test an application to detect potential compatibility issues caused by User Account Control (UAC). Monitor an application’s operating system use.   You need to select the appropriate method to detect application compatibility issues.   What should you do?()

    • A、Use the Standard User Analyzer tool.
    • B、Use the Standard User Analyzer Wizard.
    • C、Use the standalone Setup Analysis Tool.
    • D、Use the Setup Analysis Tool in a virtual environment.

    正确答案:A

  • 第21题:

    单选题
    When planning for a logically partitioned system,which of the following should be used as part of a review to ensure that each partition has the required resources? ()
    A

    Use the Workload Estimator capacity planning tool.

    B

    Use prtconf output from legacy systems.

    C

    Use the LPAR Validation Tool.

    D

    Use Performance Management Services.


    正确答案: A
    解析: 暂无解析

  • 第22题:

    单选题
    A system administrator periodically receives calls from users who complain about poor performance with their application. Use the following sar command output to answer the question: Which of the following system resources need more investigation?()
    A

    CPUs

    B

    Disk

    C

    Memory

    D

    NetworkX


    正确答案: D
    解析: 暂无解析

  • 第23题:

    单选题
    Company.com has a single pSeries server with two shared processor logical partitions. The first partition has peak resource requirements during weekdays. The second partition has peak resource requirements during weekends. During the peak times, the total workload between the partitions does NOT exceed the capacity of the server. However, the partitions are not able to utilize the full capacity of the system during peak times, because the necessary CPU and memory resources are not always allocated to the busiest partition. Which of the following options would best balance these resources?()
    A

    Configure AIX Workload Manager

    B

    Configure Partition Load Manager

    C

    Configure eServer Workload Manager

    D

    Use DLPAR from the HMC


    正确答案: B
    解析: 暂无解析