After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server fro

题目

After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）

  • A、Replace the second drive with a hot swappable one.
  • B、Swap the drive boot order in the BIOS
  • C、Make the second disk active under the disk management tool.
  • D、Rebuild the array using the hardware RAID tool at boot.
相似考题

1.什么情况下必须运行liloA.once a day from cronB.once a week from cronC.after installing a new kernelD.after installing a new module

2.When installing a new PCIe network card, when should manufacturer software and drivers beinstalled?()A. Before inserting the PCIe network card in the caseB. After inserting the new PCIe network card in the caseC. They will be automatically loaded after installationD. Load them concurrently with the PCIe network card

3.An administrator receives a contract for a server install at a new building. Which of the followingshould be completed after installing the server?()A. Log the administrator password usedB. Test the air temperatureC. Update the network diagramD. Review the evacuation procedures

4.After installing a new optical drive into a workstation, which of the following will ask for anacknowledgement?()A. IRQ ManagerB. BIOSC. Device ManagerD. Hardware Compatibility List

更多“After installing a&#”相关问题

  • 第1题：

    When installing the CRS software on two or more nodes in the same cluster, how do you know it is safe to start installing the next node? （）

    • A、Wait until the node is completely installed to start installation on the next one. 
    • B、After you insert Disk 2. 
    • C、A dialog box, "It is now safe to start installing the next node," appears during the installation. 
    • D、After Windows OS is installed on the first node.

    正确答案:C

  • 第2题：

    At which of the following times should the administrator refer to the HCL?（）

    • A、Prior to purchasing hardware
    • B、Before installation
    • C、When installing drivers
    • D、After installation

    正确答案:A

  • 第3题：

    Which of the following requires an update to the baseline after installing new software on a machine？（）

    • A、Signature-based NIPS
    • B、Signature-based NIDS
    • C、Honeypot
    • D、Behavior-based HIDS

    正确答案:D

  • 第4题：

    A technician is installing a basic router for a SOHO network. After installing the router the PCs connected to it are not able to acquire an IP address. Which of the following did the technician fail to configure correctly？（）

    • A、DHCP
    • B、DNS
    • C、WINS
    • D、NAT

    正确答案:A

  • 第5题：

    After plugging in and installing drivers for a wireless bar code reader, which of the following is the LAST step needed to configure the device?（）

    • A、Install an inventory tracking application.
    • B、Scan the bar code on the reader’s cradle.
    • C、Enable the device in Device Manager.
    • D、Remove any temporary device drivers.

    正确答案:B

  • 第6题：

    Which of the following should an administrator utilize FIRST after installing a new HBA？（）

    • A、 New Technology File Systems （NTFS）
    • B、 Digitally signed device drivers
    • C、 Virtual machine components
    • D、 Multiple RAID configurations

    正确答案:B

  • 第7题：

    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）

    • A、The routes on the HMC
    • B、The firewall setting of the LAN adapter
    • C、The name resolution protocol on the p5 590 server
    • D、The subnet mask settings on the Ethernet adapters

    正确答案:B

  • 第8题：

    After installing WebSphere Commerce V 5.6 using a quick installation， which of the following should be checked to verify the installation？（）

    • A、The installation log files
    • B、The Commerce tools can be launched and logged into properly
    • C、User ’wpadmin’ has been created
    • D、The structure of the installation directory
    • E、The WebSphere Application Server database schema

    正确答案:A,B,D

  • 第9题：

    单选题
    After installing a new hydraulic pump in a system, what special attention should be given to the hydraulic system?（）
    A

    The relief valves in the system should be readjusted

    B

    The filters and strainers should be checked frequently

    C

    All system pressure should be readjusted

    D

    The system should be drained and renewed with a fluid of different operating characteristics


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    At which of the following times should the administrator refer to the HCL？（）
    A

     Prior to purchasing hardware

    B

     Before installation

    C

     When installing drivers

    D

     After installation


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    When installing a new PCIe network card, when should manufacturer software and drivers beinstalled?（）
    A

    Before inserting the PCIe network card in the case

    B

    After inserting the new PCIe network card in the case

    C

    They will be automatically loaded after installation

    D

    Load them concurrently with the PCIe network card


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    After installing a new video card, the computer loads Windows and continuously reboots. Which of the following would be the FIRST step that a technician should take?（）
    A

    Run CHKDSK

    B

    Boot to ERD

    C

    Run MSCONFIG

    D

    Go into Safe Mode


    正确答案： D
    解析： 暂无解析

  • 第13题：

    After installing the Windows operating system, Device Manager shows a number of devices with a yellow question mark next to them. Which of the following is the MOST likely reason?（）

    • A、The latest service pack needs to be installed.
    • B、The created hard drive partition is not large enough.
    • C、The motherboard chipset driver needs to be installed.
    • D、The processor does not support the Windows OS.

    正确答案:C

  • 第14题：

    After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）

    • A、 The power supply is not sufficient to power the server.
    • B、 The voltage regulator module （VRM） was not installed.
    • C、 The IRQ setting was not set.
    • D、 The DMA setting was not set.

    正确答案:B

  • 第15题：

    An administrator receives a contract for a server install at a new building. Which of the followingshould be completed after installing the server?（）

    • A、Log the administrator password used
    • B、Test the air temperature
    • C、Update the network diagram
    • D、Review the evacuation procedures

    正确答案:C

  • 第16题：

    When installing a new PCIe network card, when should manufacturer software and drivers beinstalled?（）

    • A、Before inserting the PCIe network card in the case
    • B、After inserting the new PCIe network card in the case
    • C、They will be automatically loaded after installation
    • D、Load them concurrently with the PCIe network card

    正确答案:A

  • 第17题：

    After installing a new optical drive into a workstation, which of the following will ask for anacknowledgement?（）

    • A、IRQ Manager
    • B、BIOS
    • C、Device Manager
    • D、Hardware Compatibility List

    正确答案:B

  • 第18题：

    A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use？（）

    • A、errpt
    • B、syslog
    • C、prtdiag
    • D、errlogger

    正确答案:A

  • 第19题：

    Which of the following would be true if an administrator tried to create a commerce instance with Commerce Payments configuration values， without having Commerce Payments installed？（）

    • A、The commerce instance would be created successfully.
    • B、Attempting to configure payments instance after the commerce instance is already created will not be possible.
    • C、The commerce instance creation will fail on the step that would normally configure the payments instance.
    • D、After installing Commerce Payments， the administrator can enter the needed payment configuration values through the Administration Console.

    正确答案:A

  • 第20题：

    单选题
    You are the administrator of your company’s network. A user named Tom in the art department wants to update his Windows 2000 Professional computer so that he can view graphics at the highest resolution. Tom downloads a video card driver from the Internet and then asks of your assistance in installing it. You are unsure of the source of driver. You want to ensure that Tom does not loose productive time because of the incompatible driver. What should you do？（）
    A

    Install the driver in the computer. Save after installing the driver. Restart the computer, then  use the last known good configuration to recover the original driver

    B

    Install the driver in the computer. Save after installing the driver, use hardware troubleshooter  then use Recovery Console to recover the original driver

    C

    Display the advance attributes a parallel works for video card driver file. Install the file, if the  contents have been secured

    D

    Run file signature verification survey to verify that the driver has a digital signature. Do not  install otherwise.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    You are the administrator for Company.com's network.  Exams, who works in Financial department, wants to update the printer connected to her Windows 2000 Professional computer so that she can print graphics at a higher resolution. Exams downloads a printer driver from the Internet. The then asks for your assistance in installing the driver.  You are unsure of the source of the driver. You want to ensure that the user does not lose production time because of an incompatible driver. What should you do?（）
    A

    Display the Advanced Attributes dialog box for the printer driver file. Install the driver if the Contents have been secured. 

    B

    Run File Signature Verification to verify that the new driver has a Microsoft digital signature. Do Not install the driver if it does not have the signature. 

    C

    Install the driver. Logon to the computer. If the computer fails after installing the driver, restart The computer. Then use the last known good configuration to recover the original driver. 

    D

    Install the driver. Logon to the computer. If the computer fails after installing the driver, use the  Hardware troubleshooter. Then use the Recovery Console to recover the original driver. 


    正确答案： D
    解析： When installing new software on your computer, system files and device driver files are sometimes overwritten by unsigned or incompatible versions, causing system instability. The system files and device driver files provided with Windows 2000 have a Microsoft digital signature, which indicates that the files are original, unaltered system files or that they have been approved by Microsoft for use with Windows. 
    Using File Signature Verification, you can identify unsigned files on your computer. To check the digital signatures for system or non-system files Open File Signature Verification Click Advanced. 
    On the Search tab, click one of the following: Notify me if any system files are not signed 
    Checks only the Windows system files and all device driver files to see if they have a digital signature. 
    Look for other files that are not digitally signed Enables you to specify the file type and location of non-system files to check for a digital signature.
    Click OK, and then click Start.

  • 第22题：

    单选题
    Which of the following should an administrator utilize FIRST after installing a new HBA？（）
    A

     New Technology File Systems （NTFS）

    B

     Digitally signed device drivers

    C

     Virtual machine components

    D

     Multiple RAID configurations


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）
    A

     The power supply is not sufficient to power the server.

    B

     The voltage regulator module （VRM） was not installed.

    C

     The IRQ setting was not set.

    D

     The DMA setting was not set.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    Which of the following will corrupt the BIOS？（）
    A

     Applying the BIOS settings in the incorrect order

    B

     Power being lost during the upgrade process

    C

     Installing the OS before applying the BIOS upgrade

    D

     Imaging the system after performing a BIOS upgrade


    正确答案： D
    解析： 暂无解析

相关内容