什么情况下必须运行liloA.once a day from cronB.once a week from cronC.after installing a new kernelD.after installing a new module

第1题：

第2题：

第3题：

The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）

• A、Connect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.
• B、Move the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.
• C、Move the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.
• D、Move the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus.

第4题：

A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

• A、 backup the BIOS configuration to use later
• B、 install the BIOS update from a command prompt
• C、 create a bootable floppy and copy the BIOS update tools to the floppy
• D、 read the manufacturer’s guidelines and recommendations on installing the update

第5题：

Which of the following is MOST critical when installing a new processor in an existing system?（）

• A、Thermal paste
• B、Fans
• C、Drive speeds
• D、Cable management

第6题：

After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）

• A、 The power supply is not sufficient to power the server.
• B、 The voltage regulator module （VRM） was not installed.
• C、 The IRQ setting was not set.
• D、 The DMA setting was not set.

第7题：

Which of the following should an administrator utilize FIRST after installing a new HBA？（）

• A、 New Technology File Systems （NTFS）
• B、 Digitally signed device drivers
• C、 Virtual machine components
• D、 Multiple RAID configurations

第8题：

A technical consultant needs to deploy a Microsoft Windows 2003 server image from a single x336 to five new x336 servers using Remote Deployment Manager （RDM）.  After installing and configuring RDM and loading the installation image， the consultant wants to deploy the first server.  After the new x336 is booted， it is unable to connect to the RDM server.  Which of the following is the most likely cause of the problem？（）

• A、The new server is not PXE-enabled.
• B、The RDM agent is not configured on the RDM server.
• C、The IBM Director agent is not installed on the new server.
• D、A DHCP server is not installed or configured the network.

第9题：

You are designing a strategy to install the new scheduling application.  Which two actions should you perform？（）

• A、 Assign the scheduling application package to the Instructor OU.
• B、 Publish the scheduling application package to the Instructor OU.
• C、 Ensure that the scheduling application can install across slow WAN links.
• D、 Prevent the scheduling application from installing across slow WAN links.

第10题：

第11题：

第12题：

第13题：

第14题：

After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）

• A、Replace the second drive with a hot swappable one.
• B、Swap the drive boot order in the BIOS
• C、Make the second disk active under the disk management tool.
• D、Rebuild the array using the hardware RAID tool at boot.

第15题：

When is it necessary for a TDA to be conducted on an installed IBM DS8800? （）

• A、when installing SSD drives
• B、when adding a new workload
• C、when installing SATA drives
• D、when adding more Linux hosts

第16题：

New service from the telephone company is delivered over fiber, but the technician does not have a fiber module for the router. Which of the following would remedy this issue?（）

• A、OTDR
• B、Media converter
• C、CSU/DSU
• D、Fiber repeater

第17题：

When installing an inkjet printer for the first time， which of the following should be done FIRST？ （）

• A、Print a test page from the Printer icon under the printers tab.
• B、Select the new printer as the default printer.
• C、Run the printhead alignment within the Tools folder of the printer.
• D、Ensure that the printer is set for bi-directional printing.

第18题：

After installing a new optical drive into a workstation, which of the following will ask for anacknowledgement?（）

• A、IRQ Manager
• B、BIOS
• C、Device Manager
• D、Hardware Compatibility List

第19题：

A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use？（）

• A、errpt
• B、syslog
• C、prtdiag
• D、errlogger

第20题：

You completed the development of a new application and want to create a new domain in a new environment for functional testing. You want to have the same settings for your new domain as your old domain, with the option of changing the configuration in the new target environment. Which two actions should you execute?（）

• A、Use the introspect () command in WLST to gather the configuration information from the  original domain.
• B、Use pack/unpack to transfer the domain from one machine to another.
• C、Create a domain template from the original domain using the Domain Template Builder and use  the Configuration Wizard to create a new domain from the template.
• D、Use the Admin Console of the original domain to create a domain template from the original  domain and use the Configuration Wizard to create a new domain from the template.

第21题：

You have a VPN server that runs Windows Server 2003 Service Pack 2 (SP2). You need to monitor the performance of the VPN server for one day. What should you do? （）

• A、From the Performance console, create a trace log.
• B、From the Performance console, create a counter log.
• C、Install Network Monitor Tools. From Network Monitor create a new capture.
• D、Install Network Monitor Tools. From Network Monitor create a new parser file.

第22题：

第23题：