You have configured Junos Pulse on your Windows desktop and want to verify that the IPsec configuration policy is being pushed down to your workstation upon network authentication and login.Which utility program do you use to see this configuration and wh

第1题：

You have created a security policy on an SRX240 that permits traffic from any source-address, any destination-address, and any application. The policy will be a source IP policy for use with the Junos Pulse Access Control Service. What must you add to complete the security policy configuration?（）

• A、The intranet-auth authentication option
• B、The redirect-portal application service
• C、The uac-policy application service
• D、The ipsec-vpn tunnel

第2题：

You want to provide all users in your corporation with a single agent that provides access to multiple connection types conditionally. For example, you connect to the Junos Pulse Access Control Service if you are connected to the intranet, but you connect to the Junos Pulse Secure Access Service if you are on a remote network. Which agent should you use for this type of connection requirement?（）

• A、Junos Pulse should be configured with location awareness rules configured.
• B、Odyssey Access Client should be installed with Host Checker configured to check the client's location.
• C、Junos Pulse should be configured with all components installed.
• D、Agentless access should be enabled so that clients can connect to any service without concern for installing an agent.

第3题：

Your portable computer has a Virtual Private Network （VPN） connection configured. You need to connect to the VPN.  What should you do？（）

• A、Use the Mobile PC program.
• B、Use the Ease of Access program.
• C、Use the System and Maintenance program.
• D、Use the Network and Sharing Center program.

第4题：

You are the administrator of your company's network. You are preparing to deploy 20 new Windows 2000 Professional computers on your network. You want to be able to recover from disk failures and corrupt system files on the new computers. You want to configure the computers to automatically update their system configuration and emergency repair files on a scheduled bases.   What should you do?（）

• A、Use the at command to schedule a weekly job to back up the boot partition.
• B、Use the at command to schedule a weekly job to run the system file checker.
• C、Use Windows backup to schedule a backup of the System State Data.
• D、Use Windows backup to schedule a backup of the system partition and the boot partition.

第5题：

You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）

• A、Format the dynamic volume as a FAT32 partition.
• B、Format the dynamic volume as a FAT16 partition.
• C、Configure Disk 2 to use Encrypting File System （EFS）.
• D、Configure Disk 2 as a basic volume and format the volume as NTFS.
• E、Configure Disk 2 as a basic volume and format the volume as FAT32.

第6题：

Your network has 1，000 client computers that run Windows 7.   You plan to deploy a new application.   You need to ensure that the application deploys only during non-business hours.   What should you do？（）

• A、Use Group Policy.
• B、Use Windows Deployment Services with a schedule cast.
• C、Use Microsoft System Center Configuration Manager.
• D、Use a logon script.

第7题：

You use Windows 2000 Professional on your desktop Computer. You schedule a task to run an MMC snap-in to perform configuration tasks on other computers. You notice that the task is not completing correctly. You manually start MMC. You add the snap-in. You are then able to successfully run the task. You verify that all of your other tasks are working correctly. You want to enable your tasks to complete successfully. What should you do？（）

• A、Use Scheduled Tasks to configure the task to run under the security context of your account.
• B、Configure the Task Scheduler service account to use a local Administrator account and password.
• C、Use Computer Management to start the Messenger service and to configure the Messenger service to start automatically. 
• D、Use Computer Management to start the Task Scheduler service and to configure the Task Scheduler service to start automatically. 

第8题：

You upgrade your computer from Windows NT Workstation to a Windows 2000 Professional computer. Your computer is a member of justtalks.com domain. Prior to this upgrade your computer was configured by a system policy to require at-least a 12 alphanumeric character password. After the upgrade your computer will not apply security policy. What should you do？（）

• A、Use secedit.exe to refresh the security policy.
• B、Use the local computer policy to configure the local security policy.
• C、Use security configuration and analysis to support the security files as a .pol file.
• D、Use computer management to configure the security policy setting.

第9题：

You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）

• A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
• B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.
• C、Configure Disk 2 to use Encrypting File System （EFS）.
• D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

第10题：

You are using Windows 2000 Professional on your desktop computer. You are working on the company’s financial report and you want other users on the network to able to modify your documents for the report. You want users to share the financial report folder on the network. Because the network contains confidential information you want to prevent users from the enabling off line access for the network share that contains the financial report. What should you do？（）

• A、Use Windows Explorer to receive the offline files
• B、Using the Windows Explorer, disable the cache for the reports on the network share
• C、Use the Windows NT explorer to grant the special access for the reports on the network  share
• D、Use the synchronization manager to configure synchronization not to occur when users are  connected to the LAN connection. 

第11题：

第12题：

第13题：

Your IT director has decided to allow employees to use their laptops at home as well as in the office. You have deployed the Junos Pulse client to allow access to the offices 802.1X-enabled wired network. Your company also has the Junos Pulse Secure Access Service deployed. You want the Junos Pulse client to automatically launch the appropriate access method depending on each users location. Which three are supported to determine the users location?（）

• A、MAC address
• B、DNS server
• C、DHCP server
• D、resolve address
• E、endpoint address

第14题：

How can you verify that you have correctly configured SSH access to your Junos device?（）

• A、user@router# show system services
• B、user@router> show configuration services
• C、user@router# show configuration system services
• D、user@router# show system login

第15题：

Your company's corporate network uses Network Access Protection (NAP).Users are able to connect to the corporate network remotely.You need to ensure that data transmissions between remote client computers and the corporate network are as secure as possible. What should you do?（）

• A、Apply an IPsec NAP policy.
• B、Configure a NAP policy for 802.1X wireless connections.
• C、Configure VPN connections to use MS-CHAP v2 authentication.
• D、Restrict Dynamic Host Configuration Protocol (DHCP) clients by using NAP.

第16题：

Your network consists of a single Active Directory domain. You have a DHCP server named DHCP1 that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Service Pack 3 (SP3). All client computers are configured as DHCP clients. You change the IP address on DHCP1. Users report that they cannot connect to the network. You verify that the client computers do not receive an IP address configuration from DHCP1. You need to ensure that the client computers receive an IP address configuration from DHCP1.  What should you do on DHCP1? （）

• A、Authorize the server.
• B、Reconcile the scope.
• C、Enable conflict resolution.
• D、Restore the server configuration by using the DHCP snap-in.

第17题：

You are the administrator of your company’s network. Ten Windows 2000 Professional computers are located in the Research department. The computers contain highly confidential information. You want the 10 computers to be able to communicate with other Windows 2000 Professional computers on the network. However, you do not want them to communicate with computers that are not running Windows 2000, including those that are running Windows 95, Windows 98 and Windows NT.  You want to configure a security policy on each computer to ensure that the confidential information is secure. What should you do?（）

• A、Use Security Configuration and Analysis to import the Hisecws.inf security template file to modify the default security settings.
• B、Use security templates to create a security template file and import the security settings to modify the default security settings.
• C、Use the local computer policy to disable the access to this computer from the network option.
• D、Use Secedit.exe to reconfigure the computers’ default security settings to not allow anonymous access to the computers.

第18题：

All servers on your network run Windows Server 2008 R2. You deploy Remote Desktop Services  （RDS）.You are configuring the Remote Desktop Session Host （RD Session Host） role service. You need to ensure that authentication occurs before the Remote Desktop Connection logon screen appears. What should you do？（）

• A、In the RD Session Host Configuration tool， select the Allow connections only from computers running Remote Desktop with Network Level Authentication option.
• B、In the RD Session Host Configuration tool， select the Allow connections from computers running any version of Remote Desktop option.
• C、In the Group Policy Object Editor， configure the Set TS Gateway authentication method setting to Use smart card.
• D、In the Group Policy Object Editor， configure the Set TS Gateway authentication method setting to Use locally logged-on credentials.

第19题：

You are the network administrator for ExamSheet.  Computers on your network run Windows 2000 Professional, Windows NT Workstation 4.0 and Windows 98. Ten Windows 2000 Professional computers are located in the research department. These computers contain highly confidential information. You want the 10 Windows 2000 Professional computers to be able to communicate only with other Windows 2000 computers.  What should you do?（）

• A、On the research computers use the Local Computer Policy to disable theAccess this computer  from the networkoption.
• B、Use Security Configuration and Analysis to apply the Highly Secure security template to the research computers.
• C、Add the users of the research computers to the Power Users group on each computer.
• D、On the research computers configure the security settings to prevent anonymous access.

第20题：

You configure your Windows 2000 Professional portable computer to redirect your My Documents folder to your home folder. You want to ensure that you can access all of your files in you’re my Documents folder when you are not connected to the network. What should you do？（）

• A、Use Windows Explorer to enable offline files.
• B、Use Windows Explorer to create shortcut to access offline files folder as desktop.
• C、Use Windows Explorer to configure the properties of your home folder to be available offline.
• D、Use synchronization manager to configure your home folder to be available offline.
• E、Create a shortcut in my network places to access your home folder.

第21题：

You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully.  Which two methods can you use to resolve the problem?（）

• A、Perform an emergency repair of the system from the Windows 2000 Professional CD-ROM by     using the Emergency Repair Disk for the computer.
• B、Restart the computer. In the Recovery Console， use the Extract utility to reinstall the loopback     driver from the Windows 2000 Professional CD-ROM.
• C、Restart the computer by using the last know good configuration.
• D、Restart the computer in safe mode and reinstall the original network adapter driver. 
• E、Restart the computer and disable Plug and Play in the computer BIOS.

第22题：

You are the administrator of 15 Windows XP Professional portable computers in the sales department of your ompany. The company network uses DHCP to configure the IP addresses of the portable computers when the computers are used in the office. Company policy allows the company portable computers to be connected to users' home networks. The sales department reports that users who use home networks that have manually configured IP addresses are unable to connect the portable computers to their home networks. You want to ensure that users can connect portable computers to their home networks when they are at home and to the company network when they are in the office. You do not want to change the configuration of home computers on users' home networks. You do not want to change the administrative privileges of the sales department users. What should you do?（）

• A、Configure the network adapters of the portable computers to enable Internet Connection Sharing (ICS). 
• B、Configure the network adapters of the portable computers to enable Automatic Private IP Addressing (APIPA).
• C、Add a script to the users' desktops that changes the IP configuration between dynamic and manual.
• D、Configure the IP properties of the portable computers so that they have an alternate configuration. 

第23题：