膨胀阀(Expansion Valve)的功用是降低液态冷媒之压力及依车室内热负荷大小控制进入蒸发器内之冷媒流量.
第1题:
热力膨胀阀主要作用是使液态制冷剂节流降压。
第2题:
当空调系统工作正常时,膨胀阀与蒸发器间的冷媒状态应是低压液态的冷媒
第3题:
add refrigerant to the system
adjust the thermal expansion valve to the proper setting
adjust the float valve to the proper holding pressure
open the hand expansion valve
第4题:
open
close
remain in its position
flood the evaporator with refrigerant
第5题:
贮液器
膨胀阀
蒸发器
冷凝器
第6题:
高压、高温气态冷媒
高压、高温液态冷媒
高压、低温气态冷媒
低压、高温气态冷媒
高压、低温液态冷媒
第7题:
将液体冷媒压至蒸发器
将气体冷媒压成高压
将气体冷媒压成高温
将液体冷媒压至冷凝器
控制感温膨胀阀之开关
控制气液态冷媒之流量
第8题:
return to a neutral position
flood the evaporator
open
close
第9题:
第10题:
expansion valve to the compressor
receiver to the expansion coil
expansion valve to the evaporator
condenser to the expansion valve
第11题:
降低冷媒压力
除去水分
升高冷媒压力使冷媒吸收冷冻油提供润滑
第12题:
高压液态
高压液气态
低压液态
低压气态
第13题:
空调系统中膨胀阀过热度设置的作用是()。
第14题:
使高压液体冷媒,变为低压气体冷媒
控制冷媒之流量
装在蒸发器之入口
装在蒸发器之出口
用温度来控制冷媒之送出量
第15题:
第16题:
king valve and the expansion valve
solenoid valve and expansion valve
evaporator and receiver
compressor and evaporator
第17题:
蒸发器内冷媒状态为由低压、低温液态变成低压、低温气态
压缩机由引擎V型皮带驱动
冷凝器把高温高压气态冷媒变成中温高压液态冷媒
膨胀阀把液态冷媒变成气态冷媒
第18题:
将高压气体冷媒,在此受冷变为低压气体冷媒
储存高压液态冷媒
可以滤去水份
安装在冷凝器与膨胀阀之间
里面的压力是随着周围空气和压缩速度而改变
第19题:
with the axis of the solenoid horizontal, sensing temperature of the box, and upstream of the thermal expansion valve
upright, sensing temperature of the box, and upstream of the thermal expansion valve
upright, sensing temperature of the box, and downstream of the thermal expansion valve
upright, sensing heat of the tail coil, and upstream of the thermal expansion valve
第20题:
the expansion valve will move toward the wide open position
the expansion valve will move toward the closing position
the feeler bulb will conveys the high temperature
the superheat degree will raise
第21题:
re-adjust the discharge pressure
clean the expansion valve screen
add refrigerant
adjust the expansion valve
第22题:
高压高温气态
压高温液态
高压低温气态
高压低温液态
第23题:
冷媒过多
冷媒过少
贮液筒之干燥剂不良系统内有水分
膨胀阀调整不当