Update the HAL to support multiple processors.
In Device Manager, disable the direct memory access controller.
Use the Add/Remove Hardware Wizard to detect and install the driver for the new processor.
Reinstall Windows 2000 Professional to support a multi-processor configuration.
第1题:
Your company has 1,000 client computers. You are planning to deploy Windows 7 and a new line-of-business application. You have the following requirements: Install the application as part of the standard Windows 7 deployment. Use a single Windows 7 image for the deployment. The application must be available for use on client computers that are not connected to the network. You need to ensure that the application is installed on all new client computers. What should you do?()
第2题:
You are the network administrator for ExamSheet. You install a 16-bit ISA sound card on your Windows 2000 Professional computer. You have an unsigned device driver from the manufacturer of the sound card on a floppy disk. You install the device driver for the sound card. You restart the computer. During the startup process, the computer stops loading Windows 2000 Professional. You restart the computer and again the computer stops loading Windows 2000 Professional. You start the computer in safe mode. You want your computer to start properly. What should you do next? ()
第3题:
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?()
第4题:
You are the desktop administrator for your company. You are responsible for automating the deployment of Windows XP Professional to new computers in your company. You are preparing a Windows XP Professional computer, which you will use to test disk imaging. You install Windows XP Professional on the test computer and run the Sysprep utility. You use a third-party software package to create a disk image. You apply the disk image to a new computer and then restart the computer. Instead of completing the Windows XP Professional installation, the computer starts the Windows Welcome program, requiring you to enter additional setup information. Because you will be deploying a large number of computers, you want to ensure that the disk image can be applied without additional user interaction. What should you do?()
第5题:
You are the network administrator for The network consists of a single Active Directory domain named All servers run Windows Server 2003. All client computers run Windows 2000 Professional with Service Pack 4 or Windows XP Professional. You install Software Update Services (SUS) on a computer named TestKing1. You create a GPO that configures all client computers to receive their software update from TestKing1. One week later, you run Microsoft Baseline Security Analyzer (MBSA) on all client computers to find out whether all updates are being applied. You discover that all the Windows 2000 Professional client computer received updates, but the Windows XP Professional client computers do not receive updates. You verify that the GPO setting was applied on all Windows XP Professional computers. You need to ensure that the Windows XP Professional client computers receive their updates from TestKing1. What should you do?()
第6题:
After you install a new update, an application on the computer fails to run. You need to remove the update. What should you do?()
第7题:
Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create a primary partition in the remaining disk space and format the volume using the FAT32 file system.Reinstall Windows 98 on the new primary partition.
Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create an extended partition in the remaining disk space and format the volume using the FAT32 file system. Reinstall Windows 98 on the new extended partition.
Create and format and extended partition. Create a logical drive within the extended partition and format the drive with the FAT32 file system. Install Windows 2000 Professional on the new partition.
Create and format an extended partition. Create a logical drive within the extended partition and format the drive with the NTFS file system. Install Windows 2000 Professional on the new partition.
第8题:
When away from the office use Device Manager to remove the adapter.
When away from the office configure the startup properties for the adapter to be automatic.
Remove the computer from the docking station and start Windows 2000 Professional to disable the SCSI PC card adapter device for the current profile.
Remove the computer from the docking station and start Windows 2000 Professional, use Device Manager to remove SCSI PC card adapter device.
第9题:
Use a network-based RIS server to apply the disk image to new computers.
On the test computer, run the Sysprep -factory command. Re-create the disk image by using the third-party software.
Use Setup Manager to create a Sysprep answer file. Copy the answer file to a floppy disk, and insert the disk into new computers when the disk image is applied.
Create an Unattend.txt answer file. Copy the file to the C:/Winnt/System32 folder on the test computer. Run the Sysprep utility and re-create the disk image by using the third-party software.
第10题:
Restart the computer in the docking station.
Run the Add/Remove Hardware wizard.
Use Device Manager to scan for hardware changes.
Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.
Install the new network adapter driver.
第11题:
Publish the application by using Group Policy Software Installation.
Deploy the application by using Windows Server Update Services (WSUS).
Service an online image of Windows 7 to add the new application.
Service an offline image of Windows 7 to add the new application.
第12题:
File and Settings Transfer wizard
Application Compatibility toolkit
Windows Automated Installation toolkit
Microsoft Windows Easy Transfer wizard
第13题:
You are administering a Windows 2000 Professional, single Pentium II 400Mhz processor computer. You need to install a new accounting software application. The software manufacturer recommends that you use a dual-processor configuration. First, you install a second identical processor in your computer. You need to ensure that you will be able to install the new software. What should you do next?()
第14题:
You install windows 2000 Professional on a new dual processor Pentium III computer. The system BIOS is APM compliant. When you attempt to shutdown the computer, the shut down dialog box remains on the screen and the power remains on. What should you do?()
第15题:
You are a network administrator for your company. You need to test a new application. The application requires two processors and 2 GB of RAM. The application also requires shared folders on the application server and requires the installation of software on the client computers. You create the test plan. You assemble a server in the test lab. You install Windows Server 2003, Web Edition on theserver. You install the application on the server. You install the client software components for the application on 20 client computers in the test lab. You test the application. You discover that only some of the client computers can run the application. You turn off the client computers that ran the application successfully, and you test again. The client computers that failed in the first test now run the application successfully. You need to identify the cause of the failure and update your test plan. What should you do? ()
第16题:
Your computer runs Microsoft Windows XP Professional. You share your computer with two other co-workers. You purchase a new computer. You install Microsoft Windows Vista on the new computer. You need to migrate the following content from the old computer to the new computer: All system and program settings All users settings Only the content in the C:///Appdata folder Which tool should you use? ()
第17题:
You are the administrator of your company’s network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You want to configure the computers in the software department so that the users can use both Windows 98 and Windows 2000 Professional during the project. You also want to ensure that the computers are configured for optimal disk performance. In addition you want to ensure that users in the software department can access all of the files on their computers by using either operating system. What should you do? ()
第18题:
You are the network administrator for ExamSheet.net. You administer ExamSheet's Windows 2000 network. You want to update the device driver for the network adapter in your Windows 2000 Professional computer. You log on the computer by using the local Administrator account. You use Device Manager to verify that the network adapter is installed on your computer. You select the Driver tab and Update Driver option, and install a new driver from the network adapter manufacturer. You restart the computer. After displaying the Windows 2000 Professional startup screen, your computer displays aCkernel stop error message. You want to configure your computer to start successfully. Which two methods can you use to resolve the problem?()
第19题:
On your original machine use Device Manager/Computer/Properties/Drivers/Update Driver to install the correct multiprocessor HAL.
On the original computer, through the Add New Hardware, select the processor from the device list and install the required processor.
Download the patch from the motherboard manufacturer to allow the configuration of dual processors.
Reinstall Windows 2000 Professional on both the test computers.
第20题:
Increase the Maximum number of worker processes to 20 for the default application pool.
Use Add or Remove Programs to add the Application Server Windows component.
Change the Application pool identity to Local Service for the default application pool.
Change the test server operating system to Windows Server 2003, Standard Edition or Windows Server 2003, Enterprise Edition.
第21题:
Restart the computer, disable APM in the system BIOS, and then restart the computer.
Restart the computer, use power options in control panel to enable APM, and restart the computer.
Restart the computer, use power options in control panel to enable hibernate support, and then restart the computer.
Restart the computer, use power options in control panel to create a different power scheme, and then restart the computer.
第22题:
Restart the computer. Disable the AMP in the system BIOS restart the computer.
Restart the computer. Use the power options in control panel to enable APM and restart the computer.
Restart the computer. Use the power options in control panel to enable hibernate support then restart.
Restart the computer. Use the power options in control panel to create a different power scheme then restart.
Windows 2000 does not support APM on computers with multiple processors.
第23题:
Create and format a FAT 32 partition.
Create and format an NTFS volume.
Configure Windows 2000 Professional to enable disk compression.
Configure Windows 2000 Professional to enable dynamic volume