Router A remains the DIS and generates a new pseudonode LSP for that LAN
Router A remains the DIS and NO new pseudonode LSP is generated for that LAN
Router D becomes the new DIS, generates a new pseudonode LSP for that LAN, and purges the old pseudonode LSP generated by Router A
Router D becomes the new DIS, does NOT generate a new pseudonode LSP for that LAN, and does NOT purge the old pseudonode LSP generated by Router A
第1题:
DR (Designated Router) is for environments where many routers on the same network such as Ethernet. In the following presented network, all routers are reloaded simultaneously, and DR is selected as expected. What is the RTC status?()
A. 2WAY/DR
B. FULL/DR
C. FULL/DROTHER
D. FULL/BDR
第2题:
The OSPF process has been started and the networks have been configured for Area 0 as shown in the diagram. The network administrator has several options for configuring RouterB to ensure that it will be preferred as the designated router (DR) for the 172.16.1.0 /24 LAN segment. What configuration tasks could be used to establish this preference (Choose three.)()。
A.Configure the priority value of the Fa0/0 interface of RouterB to a higher value than any other interface on the Ethernet network.
B.Change the router id of Router B by assigning the IP address 172.16.1.130/24 to the Fa0/0 interface of RouterB.
C.Configure a loopback interface on RouterB with an IP address higher than any IP address on the other routers.
D.Change the priority value of the Fa0/0 interface of RouterB to zero.
E.Change the priority values of the Fa0/0 interfaces of RouterA and RouterC to zero.
F.No further configuration is necessary.
第3题:
Which three statements about the secure domain router are true?()
第4题:
In what two ways does the Cisco SR 520 Secure Router complement the Cisco Smart Business Communications System? ()
第5题:
What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network?()
第6题:
What is the difference between Cisco Catalyst 2960 LAN Base Series and Cisco Catalyst 2960 LAN Lite Series?()
第7题:
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?()
第8题:
There are three routers on a Gigabit Ethernet LAN: Router A, Router B, and Router C. Router A is the Designated Intermediate System (DIS) at Level 1 for that LAN. Router A's DIS priority is 64. The LAN is a Level 1-only link. Router D has just been powered up on that same LAN and its DIS priority is 80. Which statement is true?()
第9题:
The virtual IP address and virtual MA+K44C address are active on the HSRP Master router.
The HSRP default timers are a 3 second hello interval and a 10 second dead interval.
HSRP supports only clear-text authentication.
The HSRP virtual IP address must be on a different subnet than the routers' interfaces on the same LAN.
The HSRP virtual IP address must be the same as one of the router's interface addresses on the LAN.
HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing.
第10题:
The logical router can span across chassis.
The fabric and system controller module are shared by all logical routers.
Each logical router has a distinct fabric and system controller module
The logical router can share a route processor
The logical router cannot share a route processor
第11题:
Only the Cisco Catalyst 2960 LAN Base Series offers enhanced Layer 2+ intelligent LAN services.
Only the Cisco Catalyst 2960 LAN Lite Series supports Power over Ethernet.
Only the Cisco Catalyst 2960 LAN Base Series can be managed by Cisco Network Assistant.
Only the Cisco Catalyst 2960 LAN Lite Series supports Gigabit Ethernet uplinks
第12题:
10 Gigabit Ethernet does not support VLAN definition
10 Gigabit Ethernet supports full duplex links, but does not support half duplex links
10 Gigabit Ethernet supports unshielded or shielded twisted-pair cable connections
10 Gigabit Ethernet supports Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
10 Gigabit Ethernet supports optical fiber connections in single mode only. Mufti mode is not supported
第13题:
A. Dev - 1 is the DR because it has a lower OSPF router ID
B. Dev - 3 is the DR because it has a higher OSPF router priority
C. Both Dev - 1 and Dev - 3 are using the def ault OSPF router priority
D. Dev - 3 is the DR because it has a lower OSPF router ID
E. Dev - 1 is the DR because it has a higher OSPF router priority
第14题:
Which three statements about HSRP operation are true?()
第15题:
Which two statements about 10 Gigabit Ethernet (10GE) are true?()
第16题:
Your network has a mixture of Fast Ethernet and Gigabit Ethernet links. What needs t o be done to ensure optimal data routing when using OSPF?()
第17题:
The Peanut router is able to successfully ping the Serial 0 and Ethernet 0 interface of the Popcorn router, but a ping issued to the Ethernet 1 interface fails. Based on the above output, what are the potential causes of this problem?()
第18题:
A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?()
第19题:
Three IS-IS routers on a broadcast segment have different priority values configured. Which router is elected the DIS on that broadcast segment?()
第20题:
the router with the lowest priority
the router with the highest priority
the router with the highest System ID
the router with the highest IP address
第21题:
physical layer issues
no spanning tree loops
use of non-default HSRP timers
failure to set the command standby 35 preempt
第22题:
The Popcorn router is not forwarding RIP updates.
The Popcorn router did not include network 192.168.12.0 in its routing configuration.
The Ethernet1 interface of the Popcorn router is shutdown.
The clockrate is not present in the configuration of one of the routers.
The Serial interface of the Popcorn router is not operating.
第23题:
Router A remains the DIS and generates a new pseudonode LSP for that LAN
Router A remains the DIS and NO new pseudonode LSP is generated for that LAN
Router D becomes the new DIS, generates a new pseudonode LSP for that LAN, and purges the old pseudonode LSP generated by Router A
Router D becomes the new DIS, does NOT generate a new pseudonode LSP for that LAN, and does NOT purge the old pseudonode LSP generated by Router A
第24题:
No routers are adjacent with each other.
Only Router A and Router B are adjacent at Level 1.
Only Router A and Router B are adjacent at Level 2.
All three routers are adjacent with each other at Level 1.