单选题What is the correct fastpath to configure or add a TTY Terminal （directly from the screen）， which connects to a serial port？（）A smitty ttyB smitty devicesC smitty ptyD smitty dev

题目
单选题
What is the correct fastpath to configure or add a TTY Terminal （directly from the screen）， which connects to a serial port？（）
A

smitty tty

B

smitty devices

C

smitty pty

D

smitty dev

相似考题

1.An AIX system has a rootvg plus a separate volume group for database application. Which of the following commands are sued to backup the entire system?()A.smitty mksysb (select additional volume group)B.mkszfile && mksysb /dev/rmt0C.smitty mksysb AND smitty savevgD.smitty savevg (select additional volume group)

2.Which of the following options will show all of the fixes installed on a system?()A.lslpp -LB.smitty verify_installC.installp -a -VD.smit install_latest

3.A system has a TCPIP issue that is a known problem. The newest code from the support website has been downloaded to resolve the issue. Which of the following commands should be used to install the new code?（）A.smitty install_commitB.installp -ugVC.installp -aXD.instfix -all

4.500systemsarebeingdeployedtoremotelocations.Whattoolontheremotesystemscanbeusedtoautomatethedownloadandinstallationoffixesattheremotesite?()A.dshB.sumaC.sudoD.smitty

参考答案和解析
正确答案： A
解析： 暂无解析
更多“单选题What is the correct fastpath to configure or add a TTY Terminal （directly from the screen）， which connects to a serial port？（）A smitty ttyB smitty devicesC smitty ptyD smitty dev”相关问题

  • 第1题：

    After a successful system recovery, it is determined that the server will not support printing so the system administrator has decided to remove the bos.rte.printers fileset and all of its dependents. Which of the following is the correct method to accomplish this task?（）

    A.Use fastpath "smitty rmvprt"

    B.Installp -u -g bos.rte.printers

    C.Use fastpath "smitty maintain_software"; choose "Remove Installed Software";fill in values for bos.rte.printers

    D.Remove of the bos.rte.printers fileset is not permitted


    参考答案：D

  • 第2题：

    A system has a TCPIP issue that is a known problem. The newest code from the support website has been downloaded to resolve the issue. Which of the following commands should be used to install the new code?（）

    • A、smitty install_commit
    • B、installp -ugV
    • C、installp -aX
    • D、instfix -all

    正确答案:C

  • 第3题：

    To enable a tty port to be used for a cu session what must be done to the system？（）

    • A、smit tty； take the defaults and create the desired tty
    • B、In the /etc/uucp Devices add a line similar to： Direct ttyX - 9600 direct
    • C、Install bos.net.uucp and the first available tty will be configured for use by a cu session
    • D、Run the Asynchronous Terminal Emulation （ATE） program and it will configure a tty port for a cu session

    正确答案:B

  • 第4题：

    在AIX系统中，使用（）来删除用户。

    • A、smitty mkuser
    • B、smitty lsuser
    • C、smitty rmuser
    • D、smitty chuser

    正确答案:C

  • 第5题：

    To add a TTY Terminal to Serial port 1， which of the following set of options should be chosen？（）

    • A、tty rs232 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port
    • B、tty rs422 Asynchronous Terminal then sa1 Available 01-S2 Standard I/O Serial Port
    • C、tty rs232 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port
    • D、tty rs422 Asynchronous Terminal then sa0 Available 01-S1 Standard I/O Serial Port

    正确答案:C

  • 第6题：

    What is the correct fastpath to configure or add a TTY Terminal （directly from the screen）， which connects to a serial port？（）

    • A、smitty tty
    • B、smitty devices
    • C、smitty pty
    • D、smitty dev

    正确答案:A

  • 第7题：

    A System Administrator needs to determine if the system has the latest version of perfmgr and if the filesets copied to the /tmp directory are the latest. Which of the following command sequences would be required to accomplish this？（）

    • A、 lslpp -l perfmgr.* ； cd /tmp ； installp -ld
    • B、 smitty list_software ； oslevel -g
    • C、 smitty list_software ； lslpp -f perfmgr*
    • D、 cd /usr/sys/install.images ； ls -la ； cd /tmp ； ls -la

    正确答案:A

  • 第8题：

    All of the following commands will set the hostname in the ODM database EXCEPT：（）。

    • A、chdev
    • B、odmadd
    • C、hostname
    • D、smitty hostname

    正确答案:C

  • 第9题：

    单选题
    When creating a Virtual Ethernet adapter， which of the following steps is done FIRST？（）
    A

    Generate a unique MAC address.

    B

    Run cfgmgr to create device special files.

    C

    Create a virtual device with smitty vlan.

    D

    Add a virtual Ethernet adapter to the partition profile.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    What is the correct fastpath to configure or add a TTY Terminal （directly from the screen）， which connects to a serial port？（）
    A

    smitty tty

    B

    smitty devices

    C

    smitty pty

    D

    smitty dev


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    After a successful system recovery, it is determined that the server will not support printing so the system administrator has decided to remove the bos.rte.printers fileset and all of its dependents. Which of the following is the correct method to accomplish this task?（）
    A

    Use fastpath smitty rmvprt

    B

    Installp -u -g bos.rte.printers

    C

    Use fastpath smitty maintain_software; choose Remove Installed Software;fill in values for bos.rte.printers

    D

    Remove of the bos.rte.printers fileset is not permitted


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    To enable a tty port to be used for a cu session what must be done to the system？（）
    A

    smit tty； take the defaults and create the desired tty

    B

    In the /etc/uucp Devices add a line similar to： Direct ttyX - 9600 direct

    C

    Install bos.net.uucp and the first available tty will be configured for use by a cu session

    D

    Run the Asynchronous Terminal Emulation （ATE） program and it will configure a tty port for a cu session


    正确答案： A
    解析： 暂无解析

  • 第13题：

    An AIX system has a rootvg plus a separate volume group for database application. Which of the following commands are sued to backup the entire system?（）

    • A、smitty mksysb (select additional volume group)
    • B、mkszfile && mksysb /dev/rmt0
    • C、smitty mksysb AND smitty savevg
    • D、smitty savevg (select additional volume group)

    正确答案:C

  • 第14题：

    A support specialist started to apply an APAR on a system by inserting the tape into the tape drive， and loaded the fix using smitty installp. The following error message is displayed： tape not in backup format   Which of the following will resolve this problem？（）

    • A、Change density setting to 2
    • B、Set tape device to /dev/rmt0
    • C、Set block size to 0 for variable
    • D、Enable compression on tape device

    正确答案:C

  • 第15题：

    When enabling a tty port to be used for a cu session， what must be done on the system？（）

    • A、smit tty； take the defaults and create the desired tty
    • B、lsdev -Cc tty； check to see if the desired tty exists， if not create using smit tty Add a line similar to； Direct tty0 - 9600 direct to /etc/uucp/Devices Verify /etc/uucp/Dialers has the following line； direct
    • C、Install bos.net.uucp and the first available tty will be configured for use by a cu session
    • D、Run the Asynchronous Terminal Emulation （ate） program and it will configure a tty port for a cu session

    正确答案:B

  • 第16题：

    在hacmp环境中，切换节点服务的命令是（）。

    • A、smitty clstop菜单选择takeover
    • B、smitty clstop菜单选择graceful
    • C、smitty clstop菜单选择force
    • D、smitty clstop

    正确答案:A

  • 第17题：

    Which of the following options will show all of the fixes installed on a system?（）

    • A、lslpp -L
    • B、smitty verify_install
    • C、installp -a -V
    • D、smit install_latest

    正确答案:A

  • 第18题：

    500 systems are being deployed to remote locations. What tool on the remote systems can be used to automate the download and installation of fixes at the remote site?（）

    • A、dsh
    • B、suma
    • C、sudo
    • D、smitty

    正确答案:B

  • 第19题：

    When creating a Virtual Ethernet adapter， which of the following steps is done FIRST？（）

    • A、Generate a unique MAC address.
    • B、Run cfgmgr to create device special files.
    • C、Create a virtual device with "smitty vlan".
    • D、Add a virtual Ethernet adapter to the partition profile.

    正确答案:D

  • 第20题：

    Due to recent changes in infrastructure， a four-node cluster has been split into two locations， but  is still listed as a single site in HACMP. The location split has proceeded smoothly， the only exception being the serial heartbeats. There are constant errors causing the serial network to go up and down.  What is the best solution to resolve this issue？（）  

    • A、 Install the dialback failsafe optional filesets.
    • B、 Change the speed parameter in "smitty tty" to be 38400，8，N，1.
    • C、 Install additional rsct filesets required for non null modem connections.
    • D、 Change the parameters in the Network Module to stop RSCT from changing the speed of the line.

    正确答案:D

  • 第21题：

    单选题
    Due to recent changes in infrastructure， a four-node cluster has been split into two locations， but  is still listed as a single site in HACMP. The location split has proceeded smoothly， the only exception being the serial heartbeats. There are constant errors causing the serial network to go up and down.  What is the best solution to resolve this issue？（）
    A

     Install the dialback failsafe optional filesets.

    B

     Change the speed parameter in smitty tty to be 38400，8，N，1.

    C

     Install additional rsct filesets required for non null modem connections.

    D

     Change the parameters in the Network Module to stop RSCT from changing the speed of the line.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A support specialist started to apply an APAR on a system by inserting the tape into the tape drive， and loaded the fix using smitty installp. The following error message is displayed： tape not in backup format   Which of the following will resolve this problem？（）
    A

    Change density setting to 2

    B

    Set tape device to /dev/rmt0

    C

    Set block size to 0 for variable

    D

    Enable compression on tape device


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A System Administrator needs to determine if the system has the latest version of perfmgr and if the filesets copied to the /tmp directory are the latest. Which of the following command sequences would be required to accomplish this？（）
    A

     lslpp -l perfmgr.* ； cd /tmp ； installp -ld

    B

     smitty list_software ； oslevel -g

    C

     smitty list_software ； lslpp -f perfmgr*

    D

     cd /usr/sys/install.images ； ls -la ； cd /tmp ； ls -la


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    An AIX system has a rootvg plus a separate volume group for database application. Which of the following commands are sued to backup the entire system?（）
    A

    smitty mksysb (select additional volume group)

    B

    mkszfile && mksysb /dev/rmt0

    C

    smitty mksysb AND smitty savevg

    D

    smitty savevg (select additional volume group)


    正确答案： A
    解析： 暂无解析

相关内容