单选题Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）A Random bluescreen errorB Inaccessible boot driveC Missing NTLDRD Invalid boot disk

题目
单选题
Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）
A

Random bluescreen error

B

Inaccessible boot drive

C

Missing NTLDR

D

Invalid boot disk

相似考题

1.You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: "INACCESSABLE_BOOT_DEVICE ".Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.

2.You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: "INACCESSIBLE_BOOT_DEVICE."Which two actions should you take to eliminate the STOP error? (Choose Two)A．Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B．Select Safe Mode from the Windows 2000 boot menu.C．Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D．Install a driver for the SCSI controller from a floppy disk.E．Use Device Manager to update the driver for the SCSI controller.

3.POST errors in the 17xx range generally indicate ()errors.A.USBB.Floppy disk driveC.MotherboardD.Hard disk driveE.COM1

4.A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?()A. Hard disk drive failureB. NTLDR file is missingC. BIOS is corruptedD. System board failure

更多“单选题Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）A Random bluescreen errorB Inaccessible boot driveC Missing NTLDRD Invalid boot disk”相关问题

  • 第1题：

    After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）

    • A、Replace the second drive with a hot swappable one.
    • B、Swap the drive boot order in the BIOS
    • C、Make the second disk active under the disk management tool.
    • D、Rebuild the array using the hardware RAID tool at boot.

    正确答案:B

  • 第2题：

    Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）

    • A、Random bluescreen error
    • B、Inaccessible boot drive
    • C、Missing NTLDR
    • D、Invalid boot disk

    正确答案:D

  • 第3题：

    A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing？（）

    • A、The floppy drive
    • B、The hard drive
    • C、The CD-ROM drive
    • D、The DVD-ROM drive

    正确答案:A

  • 第4题：

    Which of the following can be used when installing the OS without a boot disk？（）

    • A、ZFS
    • B、VMFS
    • C、PXE
    • D、PBX

    正确答案:C

  • 第5题：

    POST errors in the 17xx range generally indicate （）errors.

    • A、USB
    • B、Floppy disk drive
    • C、Motherboard
    • D、Hard disk drive
    • E、COM1

    正确答案:D

  • 第6题：

    QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media.  What should you do?（）

    • A、From the BIOS, modify the startup order.
    • B、From the BIOS, enable Pre-Boot Execution Environment (PXE).
    • C、Create an answer file named oobe.xml and place the file on the hard disk drive.
    • D、Create an answer file named autounattend.xml and place the file on the hard disk drive.

    正确答案:A

  • 第7题：

    Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）

    • A、Start the computer in safe mode and reformat the hard disk.
    • B、Start the computer in the debug mode and reformat the hard disk.
    • C、Start the computer using the ERD and repair the Master Boot Record.
    • D、Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.

    正确答案:D

  • 第8题：

    单选题
    A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）
    A

    Optical drive

    B

    Power supply

    C

    CMOS battery

    D

    CD-ROM disk


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    Your computer has Windows 2000 Professional installed. Your office has a power outrage while you were running the disk defragmenter utility on your computer. When you start the computer again， you receive the following message： "Bad or missing OS". What should you do？（）
    A

    Start the computer in safe mode and reformat the hard disk.

    B

    Start the computer in the debug mode and reformat the hard disk.

    C

    Start the computer using the ERD and repair the Master Boot Record.

    D

    Start the computer by using the Windows 2000 Professional CD-Rom. Then use recovery console to repair the Master Boot Record.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    Which of the following can be used when installing the OS without a boot disk？（）
    A

    ZFS

    B

    VMFS

    C

    PXE

    D

    PBX


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    QUESTION 14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to installWindows 7 on the computer by using the DVD installation media and receive the following error message:Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need to ensurethat you can install Windows 7 on the computer by using the DVD installation media.  What should you do?（）
    A

    From the BIOS, modify the startup order.

    B

    From the BIOS, enable Pre-Boot Execution Environment (PXE).

    C

    Create an answer file named oobe.xml and place the file on the hard disk drive.

    D

    Create an answer file named autounattend.xml and place the file on the hard disk drive.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Which of the following could cause an Inaccessible boot drive error during the boot process? （）
    A

    HDD failure

    B

    DVI failure

    C

    USB failure

    D

    CD failure


    正确答案： A
    解析： 暂无解析

  • 第13题：

    A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）

    • A、Optical drive
    • B、Power supply
    • C、CMOS battery
    • D、CD-ROM disk

    正确答案:C

  • 第14题：

    Which of the following could cause an Inaccessible boot drive error during the boot process? （）

    • A、HDD failure
    • B、DVI failure
    • C、USB failure
    • D、CD failure

    正确答案:A

  • 第15题：

    The error ’invalid boot disk’ means：（）

    • A、the BIOS settings are incorrect.
    • B、there is no floppy disk in the drive.
    • C、the computer was unable to make temporary space for the boot process.
    • D、the computer was unable to find the information needed to start the boot process.

    正确答案:D

  • 第16题：

    When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）

    • A、Out-of-date BIOS
    • B、Invalid motherboard jumper settings
    • C、Failing power supply
    • D、Floppy disk in the drive

    正确答案:D

  • 第17题：

    A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）

    • A、Hard disk drive failure
    • B、NTLDR file is missing
    • C、BIOS is corrupted
    • D、System board failure

    正确答案:A

  • 第18题：

    You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）

    • A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.
    • B、Modify the computer's BIOS so that drive C is first in the computer's boot order. 
    • C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.
    • D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.

    正确答案:C

  • 第19题：

    单选题
    The error ’invalid boot disk’ means：（）
    A

    the BIOS settings are incorrect.

    B

    there is no floppy disk in the drive.

    C

    the computer was unable to make temporary space for the boot process.

    D

    the computer was unable to find the information needed to start the boot process.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?（）
    A

    Random bluescreen error

    B

    Inaccessible boot drive

    C

    Missing NTLDR

    D

    Invalid boot disk


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    When attempting to boot a PC, the POST process completes without error. The PC then displays,‘non system disk or disk error’. Which of the following would MOST likely cause the issue?（）
    A

    Out-of-date BIOS

    B

    Invalid motherboard jumper settings

    C

    Failing power supply

    D

    Floppy disk in the drive


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）
    A

    Replace the second drive with a hot swappable one.

    B

    Swap the drive boot order in the BIOS

    C

    Make the second disk active under the disk management tool.

    D

    Rebuild the array using the hardware RAID tool at boot.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）
    A

    Modify the computer's BIOS so that it automatically detects whether drive D is connected.

    B

    Modify the computer's BIOS so that drive C is first in the computer's boot order. 

    C

    Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)=Microsoft Windows XP Professional /fastdetect.

    D

    Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: Microsoft Windows 98 /fastdetect.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）
    A

    Hard disk drive failure

    B

    NTLDR file is missing

    C

    BIOS is corrupted

    D

    System board failure


    正确答案： C
    解析： 暂无解析

相关内容