Clean the drive with an approved cleaning disk.
Check the media for scratches or cracks.
Replace the drive with a known good one.
Verify the type of media and drive.
第1题:
A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?()
第2题:
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server, the technician discovers that the operating system does not detect the drive. After rebooting the server, the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next?()
第3题:
After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? ()
第4题:
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on, the drive LED remains lit and an error message during power-on self test (POST) states, ’No Drive Present.’ Which of the following would MOST likely be the cause?()
第5题:
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?()
第6题:
After removing several obsolete programs from a PC, a user is experiencing slower than usuallyprocessing times. Which of the following would be the BEST way to speed up the processing? ()
第7题:
Optical drive
Power supply
CMOS battery
CD-ROM disk
第8题:
Move the page file to the new drive.
Copy the system32 directory to the new drive.
Convert the C drive to a basic disk.
Setup a software RAID to mirror the C drive.
第9题:
Have the client purchase a SATA compatible system board.
Have the client purchase a SATA to IDE conversion kit.
Have the client return the drive and purchase an IDE compatible drive.
Have the client purchase a SCSI to SATA conversion kit.
第10题:
Clean the drive with an approved cleaning disk.
Check the media for scratches or cracks.
Replace the drive with a known good one.
Verify the type of media and drive.
第11题:
Format the partition
Load any RAID or SATA drivers needed
Partition the drive
Configure Windows settings
第12题:
Run the hard disk manufacturer’s diagnostic program
Re-image the drive
Replace the hard drive and load Windows
Ask the user diagnostic questions
第13题:
A user reports that their machine seems to be running slower than usual. The user states that the computer has become progressively worse as more applications are installed. Which of the following is the FIRST step the technician should take?()
第14题:
Which of the following information would be on a system classification list?()
第15题:
A technician is troubleshooting a CD/DVD drive. There is a disk in the drive and the tray wont eject. Which of the following actions should the technician take FIRST? ()
第16题:
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive?()
第17题:
A user reports that their hard drive has failed and needs to be replaced. Which of the following should the technician do FIRST?()
第18题:
The motherboard was damaged and needs replacing.
The floppy drive was not reconnected.
A configuration disk was left in the floppy drive.
The ribbon cable has been installed incorrectly.
第19题:
Power supply
DVD-RW
Blu-Ray drive
Motherboard
第20题:
The new drive’s jumper is set for master.
The new drive is connected to the secondary bus as a slave drive.
Both drives’ jumpers are set for cable select.
The old drive’s jumper is set for master and the new drive is set for slave.
第21题:
Replace the second drive with a hot swappable one.
Swap the drive boot order in the BIOS
Make the second disk active under the disk management tool.
Rebuild the array using the hardware RAID tool at boot.
第22题:
Replace the drive
Restore the drive from backup
Reboot the server
Reconfigure RAID 5 to RAID 10
第23题:
Disk drive size
IP address
Acceptable outage time
Operating system version
第24题:
Run the CHKDSK utility
Run the disk defragmenter utility
Increase the capacity on the system volume
Convert to a dynamic drive on the system