The administrator has failed to run 'bosboot -ad <2nd disk>' prior to the bootlist command.
The administrator has failed to run 'bootinfo -B <2nd disk>' prior to the bootlist command.
The administrator has failed to run 'mirrorvg -m rootvg <2nd disk>' prior to the bootlist command.
The administrator has failed to run 'bosboot -ad /dev/ipldevice <2nd disk>' prior to the bootlist command.
第1题:
A system administrator has determined a root mirrored disk, hdisk1, needs to be replaced. The root volume has been unmirrored. What is the next step to remove the disk drive?()
第2题:
One of the mirrored disks for the root volume group has failed. Although the logical volumes are mirrored, and the bosboot command was run, the machine will not boot. What is the most probable cause?()
第3题:
A system administrator’s daily monitoring has revealed a failing disk drive. The drive that is failing, hdisk0, is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive?()
第4题:
An administrator has mirrored the root volume group to a second disk, but 'bootlist' is failing to correctly add the second disk. What is the likely cause of the problem?()
第5题:
You are the network administrator for The network consists of a single Active Directory domain named All servers run Windows Server 2003. A server named TestKing7 runs Microsoft SQL Server and hosts several mission critical databases. TestKing7 contains a mirrored volume. A routine review of TestKing7 shows failed redundancy on the mirrored volume. TestKing7 is still running and the databases are still functioning correctly. You need to correct the error and restore redundancy. What should you do first?()
第6题:
Extendvg to include both disks in the rootvg
Copy the hd5 logical volume to hdisk1
Run the bosboot and bootlist commands
Reset the dump device to /dev/sysdumpnull
第7题:
The operating system crashed
A disk failure forced a volume group off line
The System Resource Controller executed a system halt
The topology services daemon has crashed due to an ODM mismatch
第8题:
Initialize the new disk. Select the failed region and then select the Repair Volume option.
Import the foreign disk. Select the failed region and then select the Repair Volume option.
Initialize the new disk. Select the failed region and then select the Reactivate Disk option.
Import the foreign disk. Select the failed region and then select the Reactivate Disk option.
第9题:
The administrator has failed to run ’bosboot -ad <2nd disk>’ prior to the bootlist command.
The administrator has failed to run ’bootinfo -B <2nd disk>’ prior to the bootlist command.
The administrator has failed to run ’mirrorvg -m rootvg <2nd disk>’ prior to the bootlist command.
The administrator has failed to run ’bosboot -ad /dev/ipldevice <2nd disk>’ prior to the bootlist command.
第10题:
chvg -Qn testvg
chlv -Qn testlv
varyoffvg testvg; varyonvg -Qn testvg
varyoffvg testvg; exportvg testvg; importvg -Qn testvg; varyonvg testvg
第11题:
Initialize the failed disk.
Select the failed disk and reactivate the disk
Defragment the mirrored volume.
Perform a disk cleanup on the mirrored volume.
第12题:
chvg
rmdev
reducevg
exportvg
第13题:
An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the disk soit can be used as theprimary boot partition on the next reboot. Which command should the administrator use?()
第14题:
A mirrored root disk needs to be replaced. Which of the following commands will clear the boot record on the failing disk?()
第15题:
Rootvg has just been mirrored to a second disk. Which of the following actions should be performed to boot the system off of either disk?()
第16题:
You are the network administrator for your company. All network servers run Windows Server 2003.One of your servers contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. The server is running and users are connecting to shared folders on the RAID-5 volume.You shut down the server and replace the failed disk.Now you need to ensure that the RAID-5 volume is redundant.What should you do? ()
第17题:
You are the network administrator for All network servers run Windows Server 2003. One of your servers, TestKingSrv1, contains a RAID-5 volume. Routine monitoring reveals a failed disk in the set. TestKingSrv1 is running and users are connecting to shared folders on the RAID-5 volume. You shut down the server and replace the failed disk. Now you need to ensure that the RAID-5 volume is redundant. What should you do?()
第18题:
Quorum was not turned off
Paging space was not mirrored
The dump space was not mirrored
The surviving disk was too small
第19题:
The administrator has failed to run 'bosboot -ad <2nd disk>' prior to the bootlist command.
The administrator has failed to run 'bootinfo -B <2nd disk>' prior to the bootlist command.
The administrator has failed to run 'mirrorvg -m rootvg <2nd disk>' prior to the bootlist command.
The administrator has failed to run 'bosboot -ad /dev/ipldevice <2nd disk>' prior to the bootlist command.
第20题:
Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.
Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.
Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.
Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.
第21题:
Convert all existing partitions to NTFS.
Using Diskpart.exe, run the create command.
Convert the disk to a dynamic disk, and create a new volume.
Using Diskpart.exe, run the extend command.
第22题:
Remove the physical volume from the system.
Remove the physical volume from the volume group.
Remove the physical partitions from the volume group.
Remove the logical volume copies from the failing drive.
第23题:
cfgmgr
rmdev -d hdisk1 -l
reducevg rootvg hdisk1
have the IBM CE replace the disk
第24题:
Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.
Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.
Initialize the new disk that is to replace the failed disk. Select the failed region and then select the Repair Volume option.
Import the foreign disk that is to replace the failed disk. Select the failed region and then select the Reactive Disk option.