单选题A customer plans to purchase a p5-570 that will run in SMP mode to host a large financial database on AIX 5.2.  The application is sized for an 8-way 1.65-GHz machine.  They do not currently have an existing HMC that supports p5 machines. This organiza

题目
单选题
A customer plans to purchase a p5-570 that will run in SMP mode to host a large financial database on AIX 5.2.  The application is sized for an 8-way 1.65-GHz machine.  They do not currently have an existing HMC that supports p5 machines. This organization experiences unpredictable short-term spikes in processor utilization.  To mitigate the risk to their business， they are interested in IBM’s CoD offering.  In addition to the 8-way system， what else should the pSeries technical specialist recommend to the customer？（）
A

Another p5-570 building block

B

Capacity Backup p5-570 building block

C

Another p5-570 building block and at least one HMC

D

Capacity Backup p5-570 building block and at least one HMC

相似考题

1. A customer wants to run eight production partitions each with the following：   ？ 0.7 CPU 1.65-GHz   ？ 4GB of RAM   ？ 2 Ethernet adapters   They do not have room for many RIO drawers since rack space is currently scarce in their data center.  They have significant unused SAN attached disk.  In addition to the Advanced POWER Virtualization feature， which of the following is the minimum recommended configuration needed to meet the customer’s requirements？（）A、p5-570 6-way 1.65-GHz， 32GBB、p5-570 8-way 1.65-GHz， 32GBC、p5-570 6-way 1.65-GHz， 48GBD、p5-570 8-way 1.65-GHz， 48GB

2.A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2.  Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）A、7311-D20 drawer with four disksB、Upgrade to AIX 5.3C、Fiber adapters to attach to SAND、Nothing

3.A customer is planning to migrate a financial application to a 12-way p5-570 system with 96GB of memory.  The application data is stored on an ESS Model 800 attached to a p670 server with AIX 5.2.  They will have a short outage window to perform the data migration.  What is the quickest way to move all the data stored on the attached ESS from the p670 to the new p5-570？（）A、Use rsync to synchronize the data across servers.B、Use exportvg and importvg to move the data to the target system.C、Use NFS to copy the data from the source system to the target system.D、Backup the data from the source system and restore to the target system.

4. Companycom is purchasing a p5 595 as part of a large server consolidation. They are planning on using micropartitioning and Virtual IO to consolidate small machines. They used the rPerf numbers for AIX 5.3 to size their solutions. They discovered that their application is not yet certified on AIX 5.3, so they will have to use AIX 5.2. What changes should be made to their configuration?（）A、Increase memoryB、Add more adaptersC、Increase both processors and adaptersD、Increase the number of processors by 20 - 30%

更多“单选题A customer plans to purchase a p5-570 that will run in SMP mode to host a large financial database on AIX 5.2.  The application is sized for an 8-way 1.65-GHz machine.  They do not currently have an existing HMC that supports p5 machines. This organiza”相关问题

  • 第1题：

    Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR. What is the best response to the customer about the POWER5 capabilities?（）

    • A、POWER5 runs in an SMP mode as default
    • B、POWER5 can run in a full system mode the same as the p690
    • C、POWER5 can run in full system mode with the purchase of PLM
    • D、POWER5 can run in a full system mode， but it is in LPAR mode

    正确答案:D

  • 第2题：

    Companycom is planning on upgrading from a pSeries S85 running AIX 4.3.3 to a p5 570 with an HMC. The new server will run AIX 5L 5.2. What should be performed prior to the migration?（）

    • A、Verify the ISV application runs on AIX 5.2
    • B、Power4 to POWER5 upgrades are not supported without a application recompile
    • C、Check the placement and size of the boot logical volume and disk space requirements on the S85
    • D、AIX 4.3.3 to AIX 5L 5.2 migrations are perfectly compatible so nothing needs to be checked

    正确答案:A

  • 第3题：

    A client has an existing p5 570 that is directly connected to a HMC. The customer will be purchasing another p5 570. Which of the following solutions would be appropriate to provide HMC connectivity to the second p5 570?（）

    • A、Implement a proxy server to provide multiple sources to one destination 
    • B、Purchase an additional Ethernet adapter for each p5 570 to provide connectivity between the two 
    • C、Purchase a network hub or switch so both p5 570s can connect to the single HMC 
    • D、Purchase an additional HMC since multiple HMC are required when more than one POWER5 Enterprise class server is used Purchase an additional HMC since multiple HMC? are required when more than one POWER5 Enterprise class server is used

    正确答案:C

  • 第4题：

    A customer is adding a new p5 machine to their environment.  The machine will host several DB2 partitions running AIX 5.2.  They currently have two SAN directors and an IBM ESS.  The SAN design allows for concurrent maintenance.  What is required on each partition to attach to the SAN？（）

    • A、A minimum of two HBAs； the customer will need to download SDD
    • B、A minimum of four HBAs； the customer will need to download SDD
    • C、A minimum of two HBAs； the customer will need to configure MPIO
    • D、A minimum of four HBAs； the customer will need to configure MPIO

    正确答案:A

  • 第5题：

    You work as a database administrator for Supportcenter.cn. You want to administer your database servers， which are running on different host machines， using the Web-enabled grid control interface. You have configured the agent on the host machines. You have started the Oracle Database 10g Grid Control utility on your machine. Which two additional components would you configure to achieve this objective？（）

    • A、Application Server Control
    • B、Oracle Management Service
    • C、Oracle Enterprise Manager Repository
    • D、Oracle Enterprise Manager Database Control

    正确答案:C,D

  • 第6题：

    单选题
    A customer wants to run eight production partitions each with the following：   ？ 0.7 CPU 1.65-GHz   ？ 4GB of RAM   ？ 2 Ethernet adapters   They do not have room for many RIO drawers since rack space is currently scarce in their data center.  They have significant unused SAN attached disk.  In addition to the Advanced POWER Virtualization feature， which of the following is the minimum recommended configuration needed to meet the customer’s requirements？（）
    A

    p5-570 6-way 1.65-GHz， 32GB

    B

    p5-570 8-way 1.65-GHz， 32GB

    C

    p5-570 6-way 1.65-GHz， 48GB

    D

    p5-570 8-way 1.65-GHz， 48GB


    正确答案： C
    解析： 暂无解析

  • 第7题：

    单选题
    A customer is adding a new p5 machine to their environment.  The machine will host several DB2 partitions running AIX 5.2.  They currently have two SAN directors and an IBM ESS.  The SAN design allows for concurrent maintenance.  What is required on each partition to attach to the SAN？（）
    A

    A minimum of two HBAs； the customer will need to download SDD

    B

    A minimum of four HBAs； the customer will need to download SDD

    C

    A minimum of two HBAs； the customer will need to configure MPIO

    D

    A minimum of four HBAs； the customer will need to configure MPIO


    正确答案： D
    解析： 暂无解析

  • 第8题：

    单选题
    Companycom is purchasing a p5 595 as part of a large server consolidation. They are planning on using micropartitioning and Virtual IO to consolidate small machines. They used the rPerf numbers for AIX 5.3 to size their solutions. They discovered that their application is not yet certified on AIX 5.3, so they will have to use AIX 5.2. What changes should be made to their configuration?（）
    A

    Increase memory

    B

    Add more adapters

    C

    Increase both processors and adapters

    D

    Increase the number of processors by 20 - 30%


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A new p5 customer has just installed a partitioned p5-550 alongside some older POWER4 servers.  The pSeries technical specialist has received a call to say that the existing HMC （7315） cannot connect to the new server.  How can the specialist help the customer？（）
    A

    Explain to the customer that they need an additional HMC for the POWER5 system.

    B

    Obtain a PO from the customer to purchase additional serial connections to the HMC.

    C

    Obtain a PO from the customer to purchase additional Ethernet connections to the HMC.

    D

    Explain to the customer that they need a firmware update on the HMC to support both POWER4 and POWER5.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A customer currently has five partitioned POWER4 systems and is adding new systems.  When the pSeries technical specialist introduces the first p5 system with CoD into this environment， how should the HMC be handled？（）
    A

    Order a new HMC to support the p5 system.

    B

    Attach the new p5 system to the existing HMC.

    C

    Upgrade the existing HMC to accommodate both the POWER4 and p5 systems.

    D

    Do nothing.  This system does not require an HMC.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    Companycom is currently using a p690 and has just ordered a p5 590. They prefer to run in full system partition mode, since their application will utilize all the resources in the machine, and they don't want the overhead of an LPAR. What is the best response to the customer about the POWER5 capabilities?（）
    A

    POWER5 runs in an SMP mode as default

    B

    POWER5 can run in a full system mode the same as the p690

    C

    POWER5 can run in full system mode with the purchase of PLM

    D

    POWER5 can run in a full system mode， but it is in LPAR mode


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A large customer is consolidating their pSeries systems onto a p5 590. They will have a requirement for a single device (disk, lun) to have multiple paths through different  adapters in a single LPAR. The primary applications were written for AIX 5.2. Which of the following would be the recommended solution to satisfy this requirement?（）
    A

    Assign the adapters to a Virtual IO partition

    B

    Use the MPIO function included in AIX 5.2

    C

    Migrate the application to AIX 5.3 and use the MPIO function

    D

    Set up two Virtual IO partitions and attach both partitions to the device


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs. In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）

    • A、Include a new HMC in the order to connect to the p5 595
    • B、Include a pair of new HMCs in the order to connect to the p5 595
    • C、Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilities
    • D、Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to  POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities

    正确答案:B

  • 第14题：

    Companycom purchased a p5 570 with no plans to partition. The customer plans to use the ASMI interface to power on and off the machine. How can ASMI be accessed without a HMC?（）

    • A、By typing diags and then going to the ASMI menus
    • B、Through SSH from a TCP/IP connection on the server
    • C、Through WebSM which is connected to a system Ethernet port
    • D、By connecting through a web browser to an HMC Ethernet port

    正确答案:D

  • 第15题：

    A customer currently has five partitioned POWER4 systems and is adding new systems.  When the pSeries technical specialist introduces the first p5 system with CoD into this environment， how should the HMC be handled？（）

    • A、Order a new HMC to support the p5 system.
    • B、Attach the new p5 system to the existing HMC.
    • C、Upgrade the existing HMC to accommodate both the POWER4 and p5 systems.
    • D、Do nothing.  This system does not require an HMC.

    正确答案:A

  • 第16题：

    A customer plans to purchase a p5-570 that will run in SMP mode to host a large financial database on AIX 5.2.  The application is sized for an 8-way 1.65-GHz machine.  They do not currently have an existing HMC that supports p5 machines. This organization experiences unpredictable short-term spikes in processor utilization.  To mitigate the risk to their business， they are interested in IBM’s CoD offering.  In addition to the 8-way system， what else should the pSeries technical specialist recommend to the customer？（）

    • A、Another p5-570 building block
    • B、Capacity Backup p5-570 building block
    • C、Another p5-570 building block and at least one HMC
    • D、Capacity Backup p5-570 building block and at least one HMC

    正确答案:C

  • 第17题：

    A new p5 customer has just installed a partitioned p5-550 alongside some older POWER4 servers.  The pSeries technical specialist has received a call to say that the existing HMC （7315） cannot connect to the new server.  How can the specialist help the customer？（）

    • A、Explain to the customer that they need an additional HMC for the POWER5 system.
    • B、Obtain a PO from the customer to purchase additional serial connections to the HMC.
    • C、Obtain a PO from the customer to purchase additional Ethernet connections to the HMC.
    • D、Explain to the customer that they need a firmware update on the HMC to support both POWER4 and POWER5.

    正确答案:A

  • 第18题：

    单选题
    A customer plans to purchase a p5-570 that will run in SMP mode to host a large financial database on AIX 5.2.  The application is sized for an 8-way 1.65-GHz machine.  They do not currently have an existing HMC that supports p5 machines. This organization experiences unpredictable short-term spikes in processor utilization.  To mitigate the risk to their business， they are interested in IBM’s CoD offering.  In addition to the 8-way system， what else should the pSeries technical specialist recommend to the customer？（）
    A

    Another p5-570 building block

    B

    Capacity Backup p5-570 building block

    C

    Another p5-570 building block and at least one HMC

    D

    Capacity Backup p5-570 building block and at least one HMC


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs. In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）
    A

    Include a new HMC in the order to connect to the p5 595

    B

    Include a pair of new HMCs in the order to connect to the p5 595

    C

    Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilities

    D

    Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to  POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom is planning on upgrading from a pSeries S85 running AIX 4.3.3 to a p5 570 with an HMC. The new server will run AIX 5L 5.2. What should be performed prior to the migration?（）
    A

    Verify the ISV application runs on AIX 5.2

    B

    Power4 to POWER5 upgrades are not supported without a application recompile

    C

    Check the placement and size of the boot logical volume and disk space requirements on the S85

    D

    AIX 4.3.3 to AIX 5L 5.2 migrations are perfectly compatible so nothing needs to be checked


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2.  Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）
    A

    7311-D20 drawer with four disks

    B

    Upgrade to AIX 5.3

    C

    Fiber adapters to attach to SAN

    D

    Nothing


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A customer is planning to migrate a financial application to a 12-way p5-570 system with 96GB of memory.  The application data is stored on an ESS Model 800 attached to a p670 server with AIX 5.2.  They will have a short outage window to perform the data migration.  What is the quickest way to move all the data stored on the attached ESS from the p670 to the new p5-570？（）
    A

    Use rsync to synchronize the data across servers.

    B

    Use exportvg and importvg to move the data to the target system.

    C

    Use NFS to copy the data from the source system to the target system.

    D

    Backup the data from the source system and restore to the target system.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Companycom is purchasing a p5 595 as part of a large server consolidation. They are planning on using micropartitioning and Virtual IO to consolidate small machines. They used the rPerf numbers for AIX 5.3 to size their solutions. They discovered that their application is not yet certified on AIX 5.3, so they will have to use AIX 5.2. What changes should be made to their configuration?（）
    A

    Increase memory

    B

    Add more adapters

    C

    Increase both processors and adapters

    D

    Increase the number of processors by 20 - 30%


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    Companycom purchased a p5 570 with no plans to partition. The customer plans to use the ASMI interface to power on and off the machine. How can ASMI be accessed without a HMC?（）
    A

    By typing diags and then going to the ASMI menus

    B

    Through SSH from a TCP/IP connection on the server

    C

    Through WebSM which is connected to a system Ethernet port

    D

    By connecting through a web browser to an HMC Ethernet port


    正确答案： D
    解析： 暂无解析

相关内容