单选题A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup 

题目
单选题
A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）
A

The profile data was not initialized after restoring the backup CD

B

The profile data was not backed up before doing the Critical Console Data backup

C

A Critical Console Data backup was performed which backs up user data， but not profile data

D

A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

相似考题

1.You are a network administrator for your company. You currently automate backups of the System State data on the servers in your network by using NTBackup. Your manager instructs you to document the procedure for restoring a server from a backup of the System State data.You need to select the correct method for performing a restoration of a backup of the System State data.What should you do?（）A. Run the following command: ntbackup.exe backup /F {"FileName"}B. Run the following command: ntbackup.exe backup systemstate /F {"FileName"}C. In Control Panel, open System, and configure the Startup and Recovery settings on the Advanced tab.D. Use NTBackup interactively.

2. A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）A、The profile data was not initialized after restoring the backup CDB、The profile data was not backed up before doing the Critical Console Data backupC、A Critical Console Data backup was performed which backs up user data， but not profile dataD、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

3. An administrator needs to recover an HMC due to a failed disk. The disk has been replaced, allowing the administrator to reinstall the HMC back to the required release of software. Backups of both the HMC Console Data and Upgrade Data are available. After reloading the HMC with the Recovery DVDs, what are the next steps to restore the HMC configuration?（）A、Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..B、Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade Data.C、Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then the Upgrade Data.D、Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data, and then the HMC Data.

4.Which of the following is the MOST important data retention consideration when creating a backup system？（）A、Utilizing disk-to-disk clustering and hot site replicationB、If the GFS backup system will cover all potential data breachesC、The process to move the data backup to an offsite locationD、The individual laws and legal requirements of the data

更多“单选题A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup ”相关问题

  • 第1题：

    A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect.  Which of the following commands can be used to determine the block size of the backup tape （）

    • A、dd
    • B、tar
    • C、cpio
    • D、restore

    正确答案:A

  • 第2题：

    A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）

    • A、dd
    • B、tar
    • C、cpio
    • D、restore

    正确答案:A

  • 第3题：

    You work as a database administrator for Supportcenter.cn. You are using Recovery Manager （RMAN） for backup and recovery of your database. You executed the delete command in RMAN to delete a backup of a tablespace. Which statement is true in this scenario？（）

    • A、The backup status will be marked expired in RMAN recovery catalog.
    • B、The backup status will be marked deleted in RMAN recovery catalog after you execute the crosscheck command.
    • C、The backup will be deleted physically from the OS （Operating system）and the backup information is removed from the recovery catalogl
    • D、The backup status will be marked deleted and you must delete the backup file manually from the OS （Operating system）.
    • E、The backup status will be marked deleted and you must delete the backup file manually from the OS （Operating system）， if you are not using Oracle Managed Files （OMF）.

    正确答案:C

  • 第4题：

    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: 1. System recovery must be possible in the event of server failure. 2. The system configuration and all current dynamic disk configurations must be backed up. 3.Other data partitions and all current dynamic disk configurations must be backed up. 4. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第5题：

    You are the network administrator for your company. The network consists of a single Active Directory domain. All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第6题：

    You are a network administrator for your company. You currently automate backups of the System State data on the servers in your network by using NTBackup. Your manager instructs you to document the procedure for restoring a server from a backup of the System State data.You need to select the correct method for performing a restoration of a backup of the System State data.What should you do?（）

    • A、Run the following command: ntbackup.exe backup /F {"FileName"}
    • B、Run the following command: ntbackup.exe backup systemstate /F {"FileName"}
    • C、In Control Panel, open System, and configure the Startup and Recovery settings on the Advanced tab.
    • D、Use NTBackup interactively.

    正确答案:D

  • 第7题：

    单选题
    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: a. System recovery must be possible in the event of server failure. b. The system configuration and all current dynamic disk configurations must be backed up. c. Other data partitions do not need to be backed up. What should you do?（）
    A

    Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.

    B

    Use the Backup utility to back up the contents of all mounted drives.

    C

    Use the Backup utility to back up only the System State data.

    D

    Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.

    E

    Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect.  Which of the following commands can be used to determine the block size of the backup tape （）
    A

    dd

    B

    tar

    C

    cpio

    D

    restore


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）
    A

    Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.

    B

    Use the Backup utility to back up the contents of all mounted drives.

    C

    Use the Backup utility to back up only the System State data.

    D

    Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.

    E

    Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）
    A

    The profile data was not initialized after restoring the backup CD

    B

    The profile data was not backed up before doing the Critical Console Data backup

    C

    A Critical Console Data backup was performed which backs up user data， but not profile data

    D

    A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）
    A

    dd

    B

    tar

    C

    cpio

    D

    restore


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    You need to ensure that you can recover system configuration and data if your computer hard disk fails.  What should you do？ （）
    A

    Create a system restore point.

    B

    Create a backup of all file categories.

    C

    Create a Complete PC Backup and Restore image.

    D

    Perform an Automated System Recovery （ASR） backup.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）

    • A、The routes on the HMC
    • B、The firewall setting of the LAN adapter
    • C、The name resolution protocol on the p5 590 server
    • D、The subnet mask settings on the Ethernet adapters

    正确答案:B

  • 第14题：

    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）

    • A、The LPAR Configuration backup is corrupt
    • B、The LPAR Configuration has been altered using DLPAR
    • C、The LPAR Configuration backup was performed on a different HMC
    • D、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

    正确答案:B

  • 第15题：

    You have a computer that runs Windows XP professional. The computer contains one partition and a floppy disk drive. You connect a new USB drive. You need to back up the computer to meet the following requirements: Enable a complete recovery if the hard disk fails. Enable an automatic restore of the operating systems. Automatically recreate the partitions during a restore process. What should you do?（）

    • A、From System Restore, create a system restore point.
    • B、From the System Tools menu, run the Files and Settings Transfer Wizard.
    • C、From Windows Backup, run the Automated System Recovery (ASR) Wizard. 
    • D、From Windows Backup, run the Backup Wizard, and then select Only backup the System State data. 

    正确答案:C

  • 第16题：

    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: a. System recovery must be possible in the event of server failure. b. The system configuration and all current dynamic disk configurations must be backed up. c. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第17题：

    The System Administrator wants to do a backup of the HMC and notices that there are two options on the HMC menu: Backup Critical Console data and Save Upgrade Data. Which of the following best describes the differences between the two options?（）

    • A、Both options back up user and partition profile data. Only the Backup Critical Console Data backs up TCP/IP settings or preferences
    • B、Both options back up partition profile information. Only the Backup Critical Console Data backs up service function settings, such as Inventory Scout, Service Agent, and Service Focal Point
    • C、The Backup Critical Console Data should be performed just before the HMC software update operation. The Save Upgrade Data should be performed each time configuration changes are made to the system or the HMC
    • D、The Save Upgrade Data should be performed just before the HMC software update operation. The Backup Critical Console Data should be performed each time configuration changes are made to the system or the HMC

    正确答案:D

  • 第18题：

    单选题
    You are a network administrator for your company. You currently automate backups of the System State data on the servers in your network by using NTBackup. Your manager instructs you to document the procedure for restoring a server from a backup of the System State data.You need to select the correct method for performing a restoration of a backup of the System State data.What should you do?（）
    A

    Run the following command: ntbackup.exe backup /F {FileName}

    B

    Run the following command: ntbackup.exe backup systemstate /F {FileName}

    C

    In Control Panel, open System, and configure the Startup and Recovery settings on the Advanced tab.

    D

    Use NTBackup interactively.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    The System Administrator wants to do a backup of the HMC and notices that there are two options on the HMC menu: Backup Critical Console data and Save Upgrade Data. Which of the following best describes the differences between the two options?（）
    A

    Both options back up user and partition profile data. Only the Backup Critical Console Data backs up TCP/IP settings or preferences

    B

    Both options back up partition profile information. Only the Backup Critical Console Data backs up service function settings, such as Inventory Scout, Service Agent, and Service Focal Point

    C

    The Backup Critical Console Data should be performed just before the HMC software update operation. The Save Upgrade Data should be performed each time configuration changes are made to the system or the HMC

    D

    The Save Upgrade Data should be performed just before the HMC software update operation. The Backup Critical Console Data should be performed each time configuration changes are made to the system or the HMC


    正确答案： B
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator needs to recover an HMC due to a failed disk. The disk has been replaced, allowing the administrator to reinstall the HMC back to the required release of software. Backups of both the HMC Console Data and Upgrade Data are available. After reloading the HMC with the Recovery DVDs, what are the next steps to restore the HMC configuration?（）
    A

    Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..

    B

    Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade Data.

    C

    Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then the Upgrade Data.

    D

    Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data, and then the HMC Data.


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    Which of the following is the MOST important data retention consideration when creating a backup system？（）
    A

    Utilizing disk-to-disk clustering and hot site replication

    B

    If the GFS backup system will cover all potential data breaches

    C

    The process to move the data backup to an offsite location

    D

    The individual laws and legal requirements of the data


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You work as a database administrator for Supportcenter.cn. You are using Recovery Manager （RMAN） for backup and recovery of your database. You executed the delete command in RMAN to delete a backup of a tablespace. Which statement is true in this scenario？（）
    A

    The backup status will be marked expired in RMAN recovery catalog.

    B

    The backup status will be marked deleted in RMAN recovery catalog after you execute the crosscheck command.

    C

    The backup will be deleted physically from the OS （Operating system）and the backup information is removed from the recovery catalogl

    D

    The backup status will be marked deleted and you must delete the backup file manually from the OS （Operating system）.

    E

    The backup status will be marked deleted and you must delete the backup file manually from the OS （Operating system）， if you are not using Oracle Managed Files （OMF）.


    正确答案： E
    解析： 暂无解析

  • 第23题：

    单选题
    You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. Each domain server has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: 1. System recovery must be possible in the event of server failure. 2. The system configuration and all current dynamic disk configurations must be backed up. 3.Other data partitions and all current dynamic disk configurations must be backed up. 4. Other data partitions do not need to be backed up. What should you do?（）
    A

    Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.

    B

    Use the Backup utility to back up the contents of all mounted drives.

    C

    Use the Backup utility to back up only the System State data.

    D

    Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.

    E

    Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    A system administrator is installing a p5 590 server with an HMC. After pulling the websm client down, it is not possible to connect to the HMC. The HMC can be pinged from the client. Which of the following settings should be verified next?（）
    A

    The routes on the HMC

    B

    The firewall setting of the LAN adapter

    C

    The name resolution protocol on the p5 590 server

    D

    The subnet mask settings on the Ethernet adapters


    正确答案： B
    解析： 暂无解析

相关内容