Cards can be added and then enabled via Hardware Management Console (HMC) GUI or command line.
The HMC allows access to the Advanced System Management Interface (ASMI), where the slots can be managed.
If the empty slot was already allocated to an LPAR, the LPAR can use the card after the cfgmgr script has been run.
The Hardware Management Console (HMC) GUI can guide a customer through the process of adding a card to an empty slot.
第1题:
Prior to implementing an LPAR system, which of the following needs to be done?()
第2题:
After purchasing the Active Memory Expansion (AME) Enablement Feature,what tasks must be completed before AME can be used?()
第3题:
A customer plans to consolidate several systems onto POWER7. Their immediate requirement is to have a single Power 770, and they will buy a second Power 770 at a later stage. They want to keep their existing three POWER5 570s and three POWER6 520s which are all managed by an HMC (7310-CR3). Which of these statements is true and would minimize the cost?()
第4题:
On which HMC GUI panel can the ’Enable Electronic Service Agent’ option be found?()
第5题:
A system administrator wants to control the HMC from their workstation. Microsoft Windows 2000 is running and the HMC graphical user interface is being used remotely. Which of the following actions will accomplish this task?()
第6题:
A graphics monitor must be attached to the server
Cluster System Management (CSM) software must be installed
The LPAR system must have an Hardware Management Console (HMC) connected
Each LPAR must be configured with a CDROM for operating system installation
第7题:
The Hardware Management Console (HMC) and Integrated Virtualization Manager (IVM).
The Hardware Management Console (HMC) and Advanced System Manager Interface (ASMI).
Integrated Virtualization Manager (IVM) and Advanced System Manager Interface (ASMI).
Integrated Virtualization Manager (IVM) and BladeCenter Advanced Management Module (AMM).
第8题:
The systems must use internal storage for boot purposes.
All virtualized ethernet adapters must be numbered below 10.
The mobile partition's network and disk access must be virtualized.
Each system must be controlled by a different Hardware Management Console (HMC).
第9题:
Workload Partitions Manager for AIX
Hardware Management Console (HMC) GUI
Integrated Virtualization Manager (IVM)
Advanced System Management Interface (ASMI)
第10题:
Enable using active partition properties with DLPAR
Enter the activation key via the AIX 6.1 command line and reboot AIX
Enter the activation key via the HMC,power cycle the managed system and start the LPAR
Enter the activation key via the HMC,modify the partition profile and restart the LPAR
第11题:
It has a GUI interface for upgrading system firmware.
It creates and manages AIX/Linux and VIOS type LPARs.
It can be managed by the Hardware Management Console (HMC).
It supports Live Partition Mobility on POWER6 systems and above.
第12题:
Use any Windows 2000 to graphically access the HMC
Load, install, and configure WebSM on the workstation
Telnet to the HMC using Exceed or a GUI emulator product from the workstation
Load, install, and configure OpenSSH or SSH on the workstation and access the HMC through the GUI interface
第13题:
Which of the following statements is true regarding implementing Live Partition Mobility on two existing POWER6 based systems?()
第14题:
Which one of these statements is true regarding hot pluggable PCIe and PCI-X slots in a Power 550?()
第15题:
Which of the following interfaces is required to implement Workload Partition Mobility? ()
第16题:
Which of the following is a feature of Integrated Virtualization Manager (IVM)? ()
第17题:
Change passwords in ASMI
Add the managed system to the HMC
Connect the p5-520 to a power source
Connect the HMC and the p5-520 server’s HMC1 port to the same network
第18题:
Run /usr/sbin/rsct/bin/rmcctrl z as hscroot.
Reboot the HMC, either through the GUI or via the command line.
Disable and re-enable RMC in the Firewall settings in the HMC GUI.
Select the Partition Communication checkbox in the LAN Adapter dialogue box.
第19题:
All the machines can be connected to the existing HMC, as long as it is updated to code level 7.7.1 or later
The Power 770 requires an HMC (7042-CR5 or later), so they must buy one. All of the systems can be managed by this new HMC
They should buy a new HMC for the Power 770 system, and leave the POWER5 and POWER6 based systems connected to the existing one
The Power 770 requires an HMC, so they should connect the Power 770 to the HMC and convert the POWER5 and POWER6 based servers to IVM
第20题:
To provide the Service Agent function, both HMCs must have Service Agent enabled and a dedicated modem and phone line.
Authorized users must have the same username and password on both HMCs, so that every user of one HMC is automatically authorized on the other.
Both HMCs are automatically notified of any changes that occur in the managed systems, so results of changes made to the managed system by one HMC are visible on the
Both HMCs must be running the same software revision. Software maintenance must be performed on both HMCs at the same time, but one HMC should be disconnected from
第21题:
The systems must use internal storage for boot purposes.
All virtualized Ethernet adapters must be numbered below 10.
The mobile partition’s network and disk access must be virtualized.
Each system must be controlled by a different Hardware Management Console (HMC).
第22题:
HMC Management
Systems Management
Service Management
Electronic Management
第23题:
lssysres -r cpu -m 9117-MMA*6512345 -r sys
lssyscfg -r proc -m 9117-MMA*6512345 -r sys
lshwres -r proc -m 9117-MMA*6512345 --level sys
lshwcfg -r proc -m 9117-MMA*6512345 --level sys