单选题What is one way to escape hardware bypass mode?（）A Reset the cabling.B Power cycle the device.C Bounce the service tunnels.D Unlock the device from the console.

题目
单选题
What is one way to escape hardware bypass mode?（）
A

Reset the cabling.

B

Power cycle the device.

C

Bounce the service tunnels.

D

Unlock the device from the console.

相似考题

1.You are validating the configuration of your SRX Series device and see the output shown below.What does this indicate?()A.The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.B.The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.C.The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.D.Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.

2.Assuming default setting,how can you erase the VTP database of VLANs on a CISCO IOS switch running in VTP server mode?()A.Enable VTP pruningB.From privileged mode，erase the startup configuration file，then reload.C.From privileged mode，erase the vlan date file，then reload.D.Cycle the switch power.

3.How does the Cisco Small Service Business Pro Service differ from the Cisco Small Business Pro warranty？（）A、 access to Cisco Small Business Support CommunityB、 device-level warrantyC、 Cisco Small Business Pro Products onlyD、 speed of hardware replacement

4.What is one way to escape hardware bypass mode?()A. Reset the cabling.B. Power cycle the device.C. Bounce the service tunnels.D. Unlock the device from the console.

更多“单选题What is one way to escape hardware bypass mode?（）A Reset the cabling.B Power cycle the device.C Bounce the service tunnels.D Unlock the device from the console.”相关问题

  • 第1题：

    Which of the following is the FIRST step a technician should take when troubleshooting a device issue？（）

    • A、Gather information from the customer.
    • B、Isolate the problem on the device.
    • C、Read the service documentation for possible causes.
    • D、Check the parts life counters.

    正确答案:A

  • 第2题：

    ou attach a mobile device that runs Windows Mobile Professional 6.1 to a computer. You discover thatWindows is unable to install the necessary device drivers for the mobile device. You need to ensure that youcan synchronize files to the mobile device.  What should you do?（）

    • A、From Windows Mobility Center， click Sync settings.
    • B、From Sync Center， click Set up new sync partnerships.
    • C、From Device Manager， click Scan for hardware changes.
    • D、From Devices and Printers， right-click the device and click Troubleshoot.

    正确答案:D

  • 第3题：

    User1 reports she lost her mobile device.She successfully remotely wiped the information from the device.Afterwards she reports she found the device， but she cannot access her mailbox or other content.What should you do？（）

    • A、Instruct the user to perform a hardware reset of the device.
    • B、You should perform a Set-ActiveSyncDeviceAccessRule
    • C、Instruct the user to change her password
    • D、Make the shell command Clear-ActiveSyncDevice -Identity User1

    正确答案:B

  • 第4题：

    Which of the following is not the emergency equipment?（）

    • A、Emergency power supply.
    • B、Quick-close device.
    • C、Emergency squad.
    • D、derricks.

    正确答案:C

  • 第5题：

    Assuming default setting，how can you erase the VTP data base of VLANs on a CISCO IOS switch running in VTP server mode？（）

    • A、Enable VTP pruning
    • B、From privileged mode，erase the startup configuration file，then reload.
    • C、From privileged mode，erase the vlandate file，then reload.
    • D、Cycle the switch power.

    正确答案:C

  • 第6题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第7题：

    You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer.  You start the computer. Windows 2000 Professional detects and installs drivers for the new SCSI devices.   Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again.   You want to enable your Windows 2000 Professional computer to start successfully. What should you do? （）

    • A、Start the computer in safe mode.  Enable driver signing.
    • B、Start the computer in safe mode.  Use Device Manager to remove the SCSI tape device.
    • C、Start the computer by using the Recovery Console.  Repair the Master Boot Record by using the fixmbr command.
    • D、Start the computer by using the Recovery Console.  Disable the SCSI adapter device driver by using the disable command.

    正确答案:D

  • 第8题：

    单选题
    You are validating the configuration of your SRX Series device and see the output shown below. What does this indicate?（）
    A

    The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.

    B

    The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.

    C

    The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.

    D

    Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.


    正确答案： The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service., The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device., The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service., Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.
    解析： 暂无解析

  • 第9题：

    单选题
    User1 reports she lost her mobile device.She successfully remotely wiped the information from the device.Afterwards she reports she found the device， but she cannot access her mailbox or other content.What should you do？（）
    A

    Instruct the user to perform a hardware reset of the device.

    B

    You should perform a Set-ActiveSyncDeviceAccessRule

    C

    Instruct the user to change her password

    D

    Make the shell command Clear-ActiveSyncDevice -Identity User1


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    In which mode are users allowed to configure the device， including interfaces， protocols， user access， and system hardware properties？（）
    A

    priviledged mode

    B

    configuration mode

    C

    monitoring mode

    D

    operational mode


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    which of the following actions will you not take before beginning installation or removal of anyNON-PNP hardware device inside the computer case?（）
    A

    Place all the hardware components in static proof bags.

    B

    Remove all the jumpers from the motherboard.

    C

    Switch off the main power and remove the power cord

    D

    Use an anti-static wrist strap.

    E

    Turn off the computer.

    F

    Place the computer on the anti-static mat


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： B
    解析： 暂无解析

  • 第13题：

    What is one way to escape hardware bypass mode?（）

    • A、Reset the cabling.
    • B、Power cycle the device.
    • C、Bounce the service tunnels.
    • D、Unlock the device from the console.

    正确答案:D

  • 第14题：

    You install a SCSI adapter and a SCSI tape drive on your Windows 2000 Professional computer. You start the computer and Windows 2000 Professional detects and installs drivers for the new SCSI devices. Later the same day, you restart your computer. During the startup process, the computer stops loading Windows 2000 Professional. You then restart the computer and it stops again. You want to enable your Windows 2000 Professional computer to start successfully. What should you do?（）

    • A、Start the computer in Safe Mode. Enable driver signing.
    • B、Start the computer in Safe Mode. Use Device Manager to remove the SCSI tape device.
    • C、Start the computer by using the Recovery Console. Repair the Master Boot Record by using the fixmbr command.
    • D、Start the computer by using the Recovery Console. Disable the SCSI adapter device driver by using the disable command.

    正确答案:D

  • 第15题：

    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）

    • A、Connect to Windows Update and install all driver updates.
    • B、From the properties of the device, select Roll Back Driver.
    • C、From Device Manager, uninstall the device and then restart the server.
    • D、From Device Manager, disable the device and then click Scan for hardware changes.

    正确答案:B

  • 第16题：

    You are the administrator of Company’s network.  A user named Sven has a Windows 2000 Professional portable computer. He has configured the portable computer with options that provide him with the maximum battery life. Sven reports that when the laptop resumes from standby mode he does not receive a prompt for the password.  You want to configure Sven’s portable computer to ensure that a password is required when the computer resumes from standby mode.   What should you do?（）

    • A、Reset Sven’s user account.
    • B、Add Sven to the Power Users group.
    • C、Configure the Advanced power options properties.
    • D、Configure the power options to use the Home/Office Desk power scheme by default.
    • E、Configure the power options to use the Portable/Laptop power scheme by default.

    正确答案:C

  • 第17题：

    You have a portable computer that runs Windows XP Professional. The computer supports Advanced Configuration and Power Interface (ACPI). You need to ensure that the computer enters Sleep Mode when you close the lid of the computer. What should you do?（） 

    • A、From Control Panel, configure the Power Options. 
    • B、From the System properties, configure the Data Execution Prevention settings. 
    • C、From the Services console, set the Startup type for the Human Interface Devices service to Manual.
    • D、From the Services console, set the Startup type for the Uninterruptable Power Supply service to Manual. 

    正确答案:A

  • 第18题：

    You install Microsoft Windows Vista on a new computer that is not connected to the Internet. After you log on， you receive a warning message about an unknown device.  You need to prevent the display of the warning message until you download an available hardware driver.  What are the two possible ways to achieve this goal？ （）

    • A、Disable the device.
    • B、Uninstall the device.
    • C、Select the Ask me again later option from the warning message details.
    • D、Select the Dont show this message again for this device option from the warning message details.

    正确答案:A,D,N

  • 第19题：

    You deploy mobile devices that run Microsoft Windows Mobile 5.0.   A Windows Mobilebased device user forgets the PIN for the device.   You need to ensure that the user can unlock the device.   What should you do？（）

    • A、Change the password for the domain user account of the user.
    • B、Perform a hard reset of the user’s Windows Mobilebased device.
    • C、Perform a soft reset of the user’s Windows Mobilebased device.
    • D、Connect the Windows Mobilebased device to the desktop computer of the user and change the password of the local user account of the user.

    正确答案:B

  • 第20题：

    单选题
    You deploy mobile devices that run Microsoft Windows Mobile 5.0.   A Windows Mobilebased device user forgets the PIN for the device.   You need to ensure that the user can unlock the device.   What should you do？（）
    A

    Change the password for the domain user account of the user.

    B

    Perform a hard reset of the user’s Windows Mobilebased device.

    C

    Perform a soft reset of the user’s Windows Mobilebased device.

    D

    Connect the Windows Mobilebased device to the desktop computer of the user and change the password of the local user account of the user.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    How does the Cisco Small Service Business Pro Service differ from the Cisco Small Business Pro warranty？（）
    A

     access to Cisco Small Business Support Community

    B

     device-level warranty

    C

     Cisco Small Business Pro Products only

    D

     speed of hardware replacement


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You have a third-party hardware device installed. The device uses a third-party driver. The device works properly. The driver’s hardware manufacturer provides a new device driver. You update the device driver, but the device fails to work. You need to ensure that you can use the new hardware device. What should you do? （）
    A

    Connect to Windows Update and install all driver updates.

    B

    From the properties of the device, select Roll Back Driver.

    C

    From Device Manager, uninstall the device and then restart the server.

    D

    From Device Manager, disable the device and then click Scan for hardware changes.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You have an Exchange organization.All servers in the organization have Exchange Server 2010 Service Pack 1 （SP1） installed. All users have Windows Mobile 6.5 devices that connect to the organization by using Exchange ActiveSync. A user named User1 reports that she lost her device and successfully performed a remote wipe of the device. User1 later reports that she located her device. User1 configures the device to connect to Exchange ActiveSync and discovers that the connection fails. You need to ensure that User1 can connect her device by using Exchange ActiveSync. What should you do？（）
    A

    Instruct User1 to perform a hardware reset on the device.

    B

    Instruct User1 to use the Exchange Control Panel （ECP） to modify the device list.

    C

    Run the Set-ActiveSyncDeviceAccessRule cmdlet from the Exchange Management Shell.

    D

    Instruct User1 to change her user account password.


    正确答案： A
    解析： 暂无解析

相关内容