A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。A.The router will use the

题目

A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

A.The router will use the static route.

B.The router will use the OSPF route.

C.The router will use the EIGRP route.

D.The router will load balance and use all three routes.

相似考题

1.Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?（）A. the routes originating from the RIP routing domainB. the routes originating from the OSPF stub areaC. all OSPF inter and intra - area routesD. all routes originating from RIP and OSPF routing domains

2.Refer to the exhibit. Router B is performing bidirectional redistribution between EIGRP an d OSPF.The network 10.100.1.0/24 should not be reachable from the 10.100.9.0/24 network. However, it needs to be reachable from any network within the EIGRP domain. All other networks should be seen in both domains. Which change to router B would accom plish these goals?（）A. Under the EIGRP process, insert the distribute - list block_net_1 out ospf 1 command.B. Under the OSPF process, insert the distribute - list block_net_1 in serial1/0 command.C. Under the EIGRP process, insert the distribute - list block_net_1 in serial1/0 command.D. Under the OSPF process, insert the distribute - list block_net_1 out eigrp 1 command.

3.Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()A. Redistribution must be enabled mutually (in both directions) to work correctly.B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.C. Default metrics are not configured under EIGRP.D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.

4.Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）A. The no auto - summary command needs to be added under router eigrp 1B. The subnets keyword was not included in the redistribute command under router ospf 1C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router AD. The default - information originate command needs to be added under router ospf 1E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF

更多“A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all ”相关问题

  • 第1题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第2题：

    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The router will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第3题：

    A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）

    • A、an OSPF update for network 192.168.0.0/16
    • B、a static router to network 192.168.10.0/24
    • C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
    • D、a RIP update for network 192.168.10.0/24
    • E、a directly connected interface with an address of 192.168.10.254/24
    • F、a default route with a next hop address of 192.168.10.1

    正确答案:E

  • 第4题：

    A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The route will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第5题：

    What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）

    • A、A hub router prevents routes from being advertised to the remote router.
    • B、Only remote routers are configured as stubs.
    • C、Stub routers are not queried for routes.
    • D、Spoke routers connected to hub routers answer the route queries for the stub router.
    • E、A stub router should have only EIGRP hub routers as neighbors.
    • F、EIGRP stub routing should be used on hub routers only.

    正确答案:B,C,E

  • 第6题：

    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）

    • A、By adding all subnets listed by the show ip route connected command
    • B、By adding the subnets of working interfaces over which static neighbors have been defined
    • C、By adding subnets redistributed on the local router from another routing source
    • D、By adding all subnets listed by the show ip route static command

    正确答案:B,C

  • 第7题：

    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）

    • A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessary
    • B、The router must hav e at least one working link connected to each routing domain
    • C、The redistribute command must be configured under EIGRP to send the routes to OSPF
    • D、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF

    正确答案:B,D

  • 第8题：

    单选题
    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。
    A

    The router will use the static route.

    B

    The router will use the OSPF route.

    C

    The router will use the EIGRP route.

    D

    The router will load balance and use all three routes.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）
    A

    static route needs to be added

    B

    floating static route needs to be added

    C

    bgp backdoor command

    D

    ospf backdoor command


    正确答案： B
    解析： 暂无解析

  • 第10题：

    多选题
    What are three key concepts that apply when configuring the EIGRP stub routing feature in a hub and spoke network？（）
    A

    A hub router prevents routes from being advertised to the remote router.

    B

    Only remote routers are configured as stubs.

    C

    Stub routers are not queried for routes.

    D

    Spoke routers connected to hub routers answer the route queries for the stub router.

    E

    A stub router should have only EIGRP hub routers as neighbors.

    F

    EIGRP stub routing should be used on hub routers only.


    正确答案： D,E
    解析： 暂无解析

  • 第11题：

    多选题
    Which of the following are methods EIGRP uses to initially populate (seed) its EIGRP topology table, before learning topology data from neighbors？（）
    A

    By adding all subnets listed by the show ip route connected command

    B

    By adding the subnets of working interfaces over which static neighbors have been defined

    C

    By adding subnets redistributed on the local router from another routing source

    D

    By adding all subnets listed by the show ip route static command


    正确答案： B,C
    解析： 暂无解析

  • 第12题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources.What will the routerconsider the most reliable information about the path to that network？（）
    A

    an OSPF update for network 192.168.0.0/16

    B

    a static router to network 192.168.10.0/24

    C

    a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop

    D

    a RIP update for network 192.168.10.0/24

    E

    a directly connected interface with an address of 192.168.10.254/24

    F

    a default route with a next hop address of 192.168.10.1


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    A. the OSPF route

    B. the EIGRP route

    C. the RIPv2 route

    D. all three routes

    E. the OSPF and RIPv2 routes


    参考答案：B

  • 第14题：

    You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also， if the local OSPF route goes away， the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）

    • A、static route needs to be added
    • B、floating static route needs to be added
    • C、bgp backdoor command
    • D、ospf backdoor command

    正确答案:C

  • 第15题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    • A、Router R2 will not form a neighbor relationship with R1.
    • B、Router R2 will obtain a full routing table, including a default route, from R1.
    • C、R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.
    • D、R2 will not have a route for the directly connected serial network, but all other directly connected

    正确答案:B

  • 第16题：

    A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）

    • A、an OSPF update for network 192.168.0.0/16
    • B、a static router to network 192.168.10.0/24
    • C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
    • D、a RIP update for network 192.168.10.0/24
    • E、a directly connected interface with an address of 192.168.10.254/24
    • F、a default route with a next hop address of 192.168.10.1

    正确答案:E

  • 第17题：

    A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。

    • A、a directly connected interface with an address of 192.168.10.254/24
    • B、a static route to network 192.168.10.0/24
    • C、a RIP update for network 192.168.10.0/24
    • D、an OSPF update for network 192.168.0.0/16
    • E、a default route with a next hop address of 192.168.10.1
    • F、a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop

    正确答案:A

  • 第18题：

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）

    • A、the OSPF route
    • B、the EIGRP route
    • C、the RIPv2 route
    • D、all three routes
    • E、the OSPF and RIPv2 routes

    正确答案:B

  • 第19题：

    单选题
    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）
    A

    the OSPF route

    B

    the EIGRP route

    C

    the RIPv2 route

    D

    all three routes

    E

    the OSPF and RIPv2 routes


    正确答案： E
    解析： 暂无解析

  • 第20题：

    单选题
    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?（）
    A

    Router R2 will not form a neighbor relationship with R1.

    B

    Router R2 will obtain a full routing table, including a default route, from R1.

    C

    R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.

    D

    R2 will not have a route for the directly connected serial network, but all other directly connected


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network？（）
    A

    an OSPF update for network 192.168.0.0/16

    B

    a static router to network 192.168.10.0/24

    C

    a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop

    D

    a RIP update for network 192.168.10.0/24

    E

    a directly connected interface with an address of 192.168.10.254/24

    F

    a default route with a next hop address of 192.168.10.1


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）
    A

    The router will use the static route.

    B

    The router will use the OSPF route.

    C

    The route will use the EIGRP route.

    D

    The router will load balance and use all three routes.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network（）。
    A

    a directly connected interface with an address of 192.168.10.254/24

    B

    a static route to network 192.168.10.0/24

    C

    a RIP update for network 192.168.10.0/24

    D

    an OSPF update for network 192.168.0.0/16

    E

    a default route with a next hop address of 192.168.10.1

    F

    a static route to network 192.168.10.0/24 with a local serial interface configured as the next hop


    正确答案： D
    解析： 暂无解析

相关内容