The Ezonexam network Topology is displayed in the exhibit below:A switch has been configured for three different VLANs: VLAN 2, VLAN 3, and VLAN 4. For the purposes of communication between VLANs a router is to be added. Host from one VLAN should be able

题目

The Ezonexam network Topology is displayed in the exhibit below:

A switch has been configured for three different VLANs: VLAN 2, VLAN 3, and VLAN 4. For the purposes of communication between VLANs a router is to be added. Host from one VLAN should be able to reach the hosts in the other VLANs.

Based on this requirement, what type of connection is acceptable between the router and switch?

(Select all valid answers)

A．10 Mbps Ethernet

B．56 kbps serial

C．100 Mbps Ethernet

D．1,544 Mbps serial

E．1000 Mbps Ethernet

相似考题

1.A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. None of the above

2.What is the purpose of the cisco Vlan Trunking protocol?()A. to provide a mechanism to dynamically assign vlan membership to switch portsB. to allow traffic to be carried from multiple vlans over a single link between switchesC. to allow native vlan information to be carried over a trunk linkD. to provide a mechanism to manually assign vlan membership to switch portsE. to allow for managing the additions,deletions,and changes of vlans between switchs

3.A company has a small network,consisting of a single switch and a single router.The switch has been configured with two vlans,and route-on-a-stick is being configured on the router for inter-vlan routing.A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate?（）A. oneB. threeC. twoD. zero

4.The TestKing network Topology is displayed in the exhibit belowA switch has been configured for three different VLANs: VLAN 2, VLAN 3, andVLAN 4. For the purposes of communication between VLANs a router is to beadded. Host from one VLAN should be able to reach the hosts in the other VLANs.Based on this requirement, what type of connection is acceptable between the routerand switch?（）A. 10 Mbps EthernetB. 56 kbps serialC. 100 Mbps EthernetD. 1,544 Mbps serialE. 1000 Mbps Ethernet

更多“The Ezonexam network Topology is displayed in the exhibit below:A switch has been configured for three different VLANs: VLAN 2, VLAN 3, and VLAN 4. For the purposes of communication between VLANs a router is to be added. Host from one VLAN should be able ”相关问题

  • 第1题：

    Which three statements are typical characteristics of VLAN arrangements?()

    A. A new switch has no VLANs configured.

    B. Connectivity between VLANs requires a Layer 3 device.

    C. VLANs typically decrease the number of collision domains.

    D. Each VLAN uses a separate address space.

    E. A switch maintains a separate bridging table for each VLAN.

    F. VLANs cannot span multiple switches.


    参考答案：B, D, E

  • 第2题：

    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）

    A.a router with subinterfaces configured on the physical interface that is connected to the switch

    B.a router with an IP address on the physical interface connected to the switch

    C.a switch with an access link that is configured between the switches

    D.a switch with a trunk link that is configured between the switches


    参考答案：A

  • 第3题：

    A company has a small network，consisting of a single switch and a single router. The switch has been configured with two vlans，and route-on-a-stick is being configured on the router for inter-vlan routing. A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate？（）

    A.one

    B.three

    C.two

    D.zero


    参考答案：C

  • 第4题：

    An 802.1x client cannot authenticate to an autonomous access point configured for multiple vlans. the native vlan does not have an ssid configured. Which one of the following links being down would prevent the clients from authenticating？（）

    • A、between the radius and the access point
    • B、between the client’s vlan and the wlse
    • C、between the native vlan and the wlse
    • D、between the client’s vlan and the radius

    正确答案:A

  • 第5题：

    A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network. Which three issues on Switch2 could be the cause？（）

    • A、Switch2 is configured for only VLAN1
    • B、Switch2 is a VTP server in a different domain
    • C、Switch2 is a VTP server in the Company domain
    • D、Switch2 is not a VTP domain.
    • E、Switch2 has a lower VTP configuration revision number than the current VTP revision
    • F、Switch2 has a higher VTP configuration revision number than the current VTP revision

    正确答案:A,C,F

  • 第6题：

    A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）

    • A、For the two vlans to communicate，a network statement for the trunk interface needs to be added to the  OSPF configuration.
    • B、For the two vlans to communicate， a network statement for each subinterface needs to be  added  to the OSPF configuration.
    • C、Direct inter-vlan communication does not require OSPF
    • D、OSPF cannot be used if router-on-a-stick is configured on the router

    正确答案:C

  • 第7题：

    A company has a small network，consisting of a single switch and a single router.The switch has beenconfigured with two vlans，and route-on-a-stick is being configured on the router for inter-vlan routing.Atrunk is configured to connect the switch to the router.What is the minimum number of router subinterfacesthat are required for all the vlans to communicate？（）

    • A、one
    • B、three
    • C、two
    • D、zero

    正确答案:C

  • 第8题：

    You have just created a new VLAN on your network.  What is one step that you should include in your VLAN-based implementation and verification plan？ （）

    • A、Verify that trunked links are configured to allow the VLAN traffic.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.
    • D、Verify that different native VLANs exist between two switches for security purposes.

    正确答案:A

  • 第9题：

    You need to design the VLAN scheme for the Company network. Which two statements are true  about best practices in VLAN design？（）

    • A、Routing should occur at the access layer ifvoice VLANs are utilized. Otherwise， routing should occur at the distribution layer.
    • B、Routing should always be performed at the distribution layer.
    • C、VLANs should be localized to a switch.
    • D、VLANs should be localized to a single switch unlessvoice VLANs are being utilized.
    • E、Routing should not be performed between VLANs located on separate switches.

    正确答案:B,C

  • 第10题：

    单选题
    Refer to the exhibit。A problem with network connectivity has been observed.It is suspected that the cable connected to switch port Fa0/9 on Switch 1 disconnected.What would be an effect of tis cable being disconnected?（）
    A

    Host B would not be able to access the server in VLAN9 until the cable is reconnected

    B

    For less than a minute ,Host B would not be able to access the server in VLAN9.Then normal network function would resume.

    C

    Communication between VLAN3 and the other VLANs would be disabled

    D

    The transfer of files from Host B to the server in VLAN9 would be significantly slower.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements are true about voice VLANs？（）
    A

    Voice VLANs are only used when connecting an IP phone and a host to distinct switch ports

    B

    Access ports that are configured with voice VLANs will always trust the CoS that is received from IP phones

    C

    Access ports that are configured with voice VLANs may or may not override the CoS value that is received from an IP phone

    D

    Voice VLANs are configured using the switchport voice vlan vlan-ID interface configuration command

    E

    Voice VLANs provide a trunking interface between an IP phone and an access port on a switch to allow traffic from multiple devices that are connected to the port

    F

    Enabling Voice VLAN on a switch port will automatically configure the port to trust the incoming CoS markings


    正确答案： A,E
    解析： 暂无解析

  • 第12题：

    单选题
    What is the purpose of the cisco Vlan Trunking protocol？（）
    A

    to provide a mechanism to dynamically assign vlan membership to switch ports

    B

    to allow traffic to be carried from multiple vlans over a single link between switches

    C

    to allow native vlan information to be carried over a trunk link

    D

    to provide a mechanism to manually assign vlan membership to switch ports

    E

    to allow for managing the additions，deletions，and changes of vlans between switchs


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）

    A.The access link needs to be configured in multiple VLANs.

    B.The link between the switches is configured in the wrong VLAN.

    C.The link between the switches needs to be configured as a trunk.

    D.VTP is not configured to carry VLAN information between the switches.

    E.Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    参考答案：C

  • 第14题：

    Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs()。

    A.a switch with a trunk link that is configured between the switches

    B.a router with an IP address on the physical interface that is connected to the switch

    C.a switch with an access link that is configured between the switches

    D.a router with subinterfaces configured on the physical interface that is connected to the switch


    参考答案：D

  • 第15题：

    You have just created a new VLAN on your network for inter-VLAN routing.  What is one step that you should include in your VLAN-based implementation and verification plan？（）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the switch is configured to allow for trunking on the switch ports.
    • C、Verify that each switch port has the proper IP address space assigned to it for the new VLAN. 
    • D、Verify that the VLAN virtual interface has been correctly created and enabled.

    正确答案:B

  • 第16题：

    Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs（）。

    • A、a switch with a trunk link that is configured between the switches
    • B、a router with an IP address on the physical interface that is connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a router with subinterfaces configured on the physical interface that is connected to the switch

    正确答案:D

  • 第17题：

    Which two statements are true about voice VLANs？（）

    • A、Voice VLANs are only used when connecting an IP phone and a host to distinct switch ports
    • B、Access ports that are configured with voice VLANs will always trust the CoS that is received from IP phones
    • C、Access ports that are configured with voice VLANs may or may not override the CoS value that is received from an IP phone
    • D、Voice VLANs are configured using the switchport voice vlan vlan-ID interface configuration command
    • E、Voice VLANs provide a trunking interface between an IP phone and an access port on a switch to allow traffic from multiple devices that are connected to the port
    • F、Enabling Voice VLAN on a switch port will automatically configure the port to trust the incoming CoS markings

    正确答案:C,D

  • 第18题：

    You have just created a new VLAN on your network.  What is one step that  you should include in your VLAN based implementation and verification plan？ （）

    • A、Verify that different native VLANs exist between two switches for security purposes.
    • B、Verify that the VLAN was added on all switches with the use of the show vlan command. 
    • C、Verify that the switch is configured to allow for trunking on the switch ports.
    • D、Verify that each switch port has the correct IP address space assigned to it for the new VLAN.

    正确答案:B

  • 第19题：

    Which statement about vlan operation on cisco catalyst switches is true?（）

    • A、when a packet is received from an 802.1Q trunk,the vlan id can be determined from the source MAC address table.
    • B、unkown unicast frames are retransmitted only to the ports that belong to the same vlan
    • C、ports between switches should be configured in access mode so that vlans can span across the ports
    • D、broadcast and multicast frames are retransmitted to ports that are configured on different vlan.

    正确答案:B

  • 第20题：

    What is the purpose of the cisco Vlan Trunking protocol?（）

    • A、to provide a mechanism to dynamically assign vlan membership to switch ports
    • B、to allow traffic to be carried from multiple vlans over a single link between switches
    • C、to allow native vlan information to be carried over a trunk link
    • D、to provide a mechanism to manually assign vlan membership to switch ports
    • E、to allow for managing the additions,deletions,and changes of vlans between switchs

    正确答案:E

  • 第21题：

    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）

    • A、a router with subinterfaces configured on the physical interface that is connected to the switch
    • B、a router with an IP address on the physical interface connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a switch with a trunk link that is configured between the switches

    正确答案:A

  • 第22题：

    单选题
    A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）
    A

    For the two vlans to communicate，a network statement for the trunk interface needs to be added to the  OSPF configuration.

    B

    For the two vlans to communicate， a network statement for each subinterface needs to be  added  to the OSPF configuration.

    C

    Direct inter-vlan communication does not require OSPF

    D

    OSPF cannot be used if router-on-a-stick is configured on the router


    正确答案： B
    解析： 暂无解析

  • 第23题：

    多选题
    Which three statements are typical characteristics of VLAN arrangements?（）
    A

    A new switch has no VLANs configured.

    B

    Connectivity between VLANs requires a Layer 3 device.

    C

    VLANs typically decrease the number of collision domains.

    D

    Each VLAN uses a separate address space.

    E

    A switch maintains a separate bridging table for each VLAN.

    F

    VLANs cannot span multiple switches.


    正确答案： A,C
    解析： 暂无解析

相关内容