When considering migrating a POWER6 server with PCI-X and PCIe adapters to a Power 720, which statement is true?（）A、PCIe adapters are supported only in I/O drawersB、PCI-X adapters are supported in both the CEC and in I/O drawersC、PCI-X adapters are suppor

题目

When considering migrating a POWER6 server with PCI-X and PCIe adapters to a Power 720, which statement is true?（）

  • A、PCIe adapters are supported only in I/O drawers
  • B、PCI-X adapters are supported in both the CEC and in I/O drawers
  • C、PCI-X adapters are supported in the CEC; PCIe adapters are supported in 12X I/O drawers
  • D、PCIe adapters are supported in the CEC; PCI-X adapters are supported in 12X I/O drawers
相似考题

1.组成BCR复合体的成分是( )A、mIg、CD21和CD19B、mIg、CD80和CD86C、mIg、CD79a和CD79bD、CD81、CD21和CD19E、mIg、CD40和CD40L

2.3．Why not_________your position?A． considering changingB． considering to changeC． consider changeD． consider changing

3.BCR复合物的组成成分为( )A. mIg ,CD3B. IgM, CD79a/CD79bC. IgD, CD79a/CD79bD. mIg, Igα和IgβE. mIg, IgA和IgG

4.成熟B细胞BCR复合物的成分是A、mIg、CD40和CD21B、mIg、CD19和CD21C、mIg、CD79α和CD79βD、mIg、CD80和CD86E、CD19、CD40和CD21

更多“When considering mig”相关问题

  • 第1题：

    When considering a vessel&39;s stability，which spaces in a general cargo vessel are the best locations for the carriage of bulk grain?

    A.Deep tanks

    B.Lower holds

    C.Lower holds at the ends of the vessel

    D.Tween-decks


    正确答案：A

  • 第2题：

    在进行铝合金车体焊接时，使用脉冲MIG焊或使用直流MIG焊模式完成都可以。


    正确答案:错误

  • 第3题：

    When considering the default behavior of Junos platforms, which statement is true about archiving configurations?（）

    • A、A system log message is generated, confirming the transfer attempt.
    • B、The destination filename format can be altered by configuration.
    • C、The frequency the system archives the configuration cannot be changed.
    • D、An archive log is created to track transfer attempts, both failed and successful.

    正确答案:A

  • 第4题：

    在进行铝合金车体焊接时，必须保证使用（）完成。

    • A、直流MIG焊模式
    • B、脉冲MIG焊
    • C、直流MIG焊模式或脉冲MIG焊
    • D、交流MIG焊模式

    正确答案:B

  • 第5题：

    什么叫MIG钎焊？


    正确答案:采用低熔点的铜基焊丝钎料（如：硅青铜、铝青铜等），在纯氩气保护下的熔化极气体保护焊—叫MIG钎焊。具有焊丝熔化速度快，电弧稳定性好，熔深浅，焊速快等工艺特点。控制焊接热输入量最低，母材不熔化；焊丝迅速熔化并渗透于焊缝间隙中，形成钎焊接头。焊缝强度高，工件热影响区很小，焊后薄板不变形。适合于焊接板厚δ=0.8~2mm的车身薄板对接接头、搭接接头及点焊焊缝，广泛应用汽车车体和镀层钢板的焊接。

  • 第6题：

    BCR的识别抗原部位（）

    • A、mIg的HVR
    • B、mIg的CDR1
    • C、mIg的CDR2
    • D、mIg的CDR3

    正确答案:A

  • 第7题：

    Which of the following is the MOST important factor when considering environmental factors?（）

    • A、Server room access should be limited to authorized personnel.
    • B、Servers should be kept in a warm and dark environment.
    • C、Remove the floppy drives from the system.
    • D、The server administrator should ensure adequate levels of cooling.

    正确答案:D

  • 第8题：

    MIG焊


    正确答案: MIG焊是代表熔化极氩弧焊。

  • 第9题：

    单选题
    When considering the lowest fuel system operating temperature, （） are important.
    A

    specific gravity or relative density

    B

    open flash point and closed flash point values

    C

    higher calorific and lower calorific values

    D

    cloud point and pour point values


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    When considering the default behavior of Junos plattforms, which statement is true about archiving configurations?（）
    A

    A system log message is generated, confirmed the transfer attempt

    B

    The destination filename format can be altered by configuration

    C

    The frequency the system archives the configuration cannot be changed

    D

    An archive log is created to track transfer attempts both failed and successfull


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    What is the recommended practice when considering VPN termination and firewall placement？（）
    A

     have the firewall and VPN appliance deployed in parallel

    B

     place the VPN in line with the firewall， with the VPN terminating inside the firewall

    C

     place the public side of the VPN termination device in the DMZ behind a firewall

    D

     place the VPN in line with the firewall， with the VPN terminating outside the firewall


    正确答案： A
    解析： 暂无解析

  • 第12题：

    问答题
    与普通MIG/MAG焊相比之下，脉冲MIG/MAG焊接有何特点？

    正确答案： 普通MIG/MAG焊的主要熔滴过渡形式是射流过渡。而脉冲MIG/MAG焊的熔滴过渡特点是每个电流脉冲过渡一个熔滴，就其实质而言属于射滴过渡。这时主要特点如下：
    1）脉冲MIG/MAG焊的最佳熔解滴过渡形式是一个脉冲过渡一个熔滴。这样通过调节脉冲频率就能够改变单位时间内熔滴过渡的滴数，也就是焊丝熔化速度。
    2）由于一脉一滴的射滴过渡，熔滴直径大致与焊丝直径相等，则熔滴电弧热较低，也就是熔滴温度低（与射流过渡和大滴过渡相比）。所以提高了焊丝的熔化系数，也就是提高了焊丝的熔化效率。
    3）因熔滴温度低，所以焊接烟雾少。这样一方面降低了合金元素的烧损，另一方面改善了施工环境。
    4）焊接飞溅小，甚至无飞溅。
    5）弧长短，电弧指向性好，适于全位置焊接。
    6）焊缝成形良好，熔宽较大，指状熔深特点减弱，余高小。
    7）扩大了MIG/MAG焊射流过渡的使用电流范围。脉冲焊时焊接电流从射流过渡的临界电流附近一直到几十安的较大电流范围内均可实现稳定的射滴过渡。
    解析： 暂无解析

  • 第13题：

    Even where the contract was not made between the master and the consignee，it has been held ______ the master maintain an action against consignee upon an implied promise to pay the freight，in considering of his letting the goods out of his hands before payment．

    A.where

    B.which

    C.that

    D.when


    正确答案：C

  • 第14题：

    When considering SAN to SAN replication between sites， which of the following is the MOST important concern？（）

    • A、 WAN link speed
    • B、 Block size
    • C、 Disk size
    • D、 File system type

    正确答案:A

  • 第15题：

    简述什么是MIG焊？


    正确答案:使用熔化电极的惰性气体保护焊，其英文简称为MIG焊。

  • 第16题：

    焊接机器人抗干扰能力差（）

    • A、不能采用TIG接方法
    • B、可以采用MIG接方法
    • C、必须采用MIG接方法
    • D、能采用MIG接方法

    正确答案:A

  • 第17题：

    MIG和TIG分别代表什么？


    正确答案: MIG代表自动熔化极氩弧焊；TIG代表手工钨极氩弧焊。

  • 第18题：

    Which logical channel must be dimensioned for each cell when considering the call set-up frequency? （）

    • A、SACCH
    • B、SDCCH
    • C、FCCH
    • D、SCH
    • E、BCCH

    正确答案:B

  • 第19题：

    When considering Dynamic Infrastructure, which IBM storage technology is the IBMrecommended solution for small and medium businesses?（）

    • A、IBM System Storage DS3500 Express 
    • B、IBM System Storage DS5300 
    • C、IBM XIV Storage System 
    • D、IBM N series 6240

    正确答案:A

  • 第20题：

    单选题
    When considering a vessel’s stability，which spaces in a general cargo vessel are the best locations for the carriage of bulk grain? （）
    A

    Deep tanks

    B

    Lower holds

    C

    Lower holds at the ends of the vessel

    D

    'Tween-decks


    正确答案： B
    解析： 暂无解析

  • 第21题：

    问答题
    Practice 7　　A: What is important when...?　　Maintaining customer interest in a company’s products　　●Quality goods　　● Excellent after-sales service　　●Feedback　　B: What is important when...?　　Considering transport management　　●Timing　　●Cost

    正确答案： 【参考范例】
    If you choose A:
    As everyone knows, it is of great importance for a company to maintain customer interest in their products, which can help the company keep the sales increasing. I think a company should make every effort to retain its current customers. First, it should always confirm that it provides its customers with quality goods and good after-sales services. Second, it should place enough emphasis on the feedback from its current customers and take prompt action to meet their needs and demands. Third, if possible, some incentives to its old customers should be provided to maintain this part of customers. All in all, a company should try every possible way to keep its current customers who are satisfied with its products and services, and meanwhile it should stay ahead of the market.
    If you choose B:
    Any distribution of products from producers to whole-salers or from wholesalers to retailers requires transportation. Sometimes, the cost of transporting some products can outnumber the cost of producing them. Therefore, an efficient form of transportation can give rise to lower costs and higher profits for the company. For each form of transportation, timing, cost, and availability should be estimated. This assessment permits the company to choose an optimal method of transportation. The most common forms of transportation used to distribute are truck, rail, air, water, pipeline.
    解析： 暂无解析

  • 第22题：

    单选题
    The student _____ continuing his studies when he had to return to his home country unexpectedly.
    A

    is considering    

    B

    was considering  

    C

    should consider  

    D

    has considered


    正确答案： C
    解析：
    when引导的时间状语从句中，谓语动词为一般过去时，可知空格中动词也为过去时，故B项正确。

  • 第23题：

    单选题
    A bicycle company makes five styles of bikes in seven different colors. How many different bicycles can the company make when considering both style and color?
    A

    35

    B

    12

    C

    7

    D

    5

    E

    2


    正确答案： D
    解析：
    Multiply the number of styles, 5, by the number of colors,7, to get the number of bicycles that can be made by thecompany,5×7 = 35. Therefore, there are a total of 35 different types of bicycles that can be made by the company.

  • 第24题：

    单选题
    When considering SAN to SAN replication between sites， which of the following is the MOST important concern？（）
    A

     WAN link speed

    B

     Block size

    C

     Disk size

    D

     File system type


    正确答案： C
    解析： 暂无解析

相关内容