How will router A choose a path to the 10.1.2.0／24 network when different routing protocols are configured (Choose three.)()。A.If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.B.If RIPv2 is the routing p

题目
How will router A choose a path to the 10.1.2.0／24 network when different routing protocols are configured (Choose three.)()。

A.If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

B.If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

C.If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

D.If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

E.If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

F.If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

相似考题

1.Router VE1 has just received a packet and needs to route it. What two actions must this router take in order to route incoming packets? (Choose two)A. Inspect the routing table to select the best path to the destination network addresses.B. Validate sources of routing information.C. Inspect the ARP table to verify a legitimate source MAC address for each packet.D. Identify the destination network address of each packet.E. Verify the receipt of routed packets by the next hop router.F. Identify the source network address of each packet.

2.You have just configured a static default route on router TK1. What is the purpose of a default route?()A. It is a route to be used when the routing protocol fails.B. It is a route configured by an ISP that sends traffic into a corporate network.C. It is a route used when a packet is destined for a remote network that is not listed in the routing table.D. It is a route manually configured for a specific remote network for which a routing protocol is not configured.E. It is used to send traffic to a stub network.

3.Part of the job as a network administrator is being able to make a distinction between routed protocols and routing protocols. Which of the following statements is true regarding them?（）A、A routing protocol is assigned to an interface and determines the method of packet delivery.B、A routed protocol is assigned to an interface and determines the method of packet delivery.C、A routing protocol determines the path of a packet through a network.D、A routed protocol determines the path of a packet through a network.E、A routing protocol operates at the transport layer of the OSI model.F、A routed protocol updates the routing table of a router.

4.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

参考答案和解析
参考答案：A, D, E
更多“How will router A choose a path to the 10.1.2.0／24 network when different routing protocols are configured (Choose three.)()。 ”相关问题

  • 第1题：

    Which of these statements accurately identifies how Unicast Reverse Path Forwarding can be employed to prevent the use of malformed or forged IP sources addresses？（）

    • A、It is applied only on the input interface of a router.
    • B、It is applied only on the output interface of a router.
    • C、It can be configured either on the input or output interface of a router.
    • D、It cannot be configured on a router interface.
    • E、It is configured under any routing protocol process.

    正确答案:A

  • 第2题：

    Which of the following statements regarding routed and routing protocols are true?（）

    • A、A routed protocol is assigned to an interface and determines the method of packet deliver.
    • B、A routing protocol determines the path of a packet through a network.
    • C、A routed protocol determines the path of a packet through a network.
    • D、A routing protocol operates at the transport layer of the OSI model.
    • E、A routed protocol updates the routing table of a router.

    正确答案:A,B

  • 第3题：

    What are three valid LDP message types? （）(Choose three.)

    • A、peer discovery
    • B、label distribution
    • C、path initialization
    • D、session management
    • E、connection establishment

    正确答案:A,B,D

  • 第4题：

    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。

    • A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.
    • B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.
    • D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.
    • F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

    正确答案:A,D,E

  • 第5题：

    Which of the following statements describe the characteristic of link state routing protocols?（）

    • A、The exchange of an advertisement is triggered by a change in the network.
    • B、All routers exchange routing tables with each other in a multipoint network.
    • C、Packets are routed based upon the shortest path to the destination.
    • D、Paths are chosen depending on the cost efficiency factor.
    • E、Every router in an OSPF area is capable of representing the entire network topology.
    • F、Only the designated router in an OSPF area can represent the entire network topology.

    正确答案:A,C,E

  • 第6题：

    What are two reasons a network administrator would use CDP (Choose two.)（）。

    • A、to verify the type of cable interconnecting two devices
    • B、to determine the status of network services on a remote device
    • C、to obtain VLAN information from directly connected switches
    • D、to verify Layer 2 connectivity between two devices when Layer 3 fails
    • E、to obtain the IP address of a connected device in order to telnet to the device
    • F、to determine the status of the routing protocols between directly connected routers

    正确答案:D,E

  • 第7题：

    Which three types of optimization does the WX 60 device perform when Exchange 2000 and Outlook 2000 are used in the network? （）(Choose three.)

    • A、Fast Connection Setup
    • B、TCP Acceleration (AFP)
    • C、Network Sequence Caching
    • D、AppFlow's MAPI acceleration
    • E、Molecular Sequence Reduction

    正确答案:B,D,E

  • 第8题：

    单选题
    You have just configured a static default route on router TK1. What is the purpose of a default route?（）
    A

    It is a route to be used when the routing protocol fails.

    B

    It is a route configured by an ISP that sends traffic into a corporate network.

    C

    It is a route used when a packet is destined for a remote network that is not listed in the routing table.

    D

    It is a route manually configured for a specific remote network for which a routing protocol is not configured.

    E

    It is used to send traffic to a stub network.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    多选题
    Which of the following statements regarding routed and routing protocols are true?（）
    A

    A routed protocol is assigned to an interface and determines the method of packet deliver.

    B

    A routing protocol determines the path of a packet through a network.

    C

    A routed protocol determines the path of a packet through a network.

    D

    A routing protocol operates at the transport layer of the OSI model.

    E

    A routed protocol updates the routing table of a router.


    正确答案： A,E
    解析： 暂无解析

  • 第10题：

    多选题
    Which three parameters are configured in the IKE policy? （）(Choose three.)
    A

    mode

    B

    preshared key

    C

    external interface

    D

    security proposals

    E

    dead peer detection settings


    正确答案： D,E
    解析： 暂无解析

  • 第11题：

    多选题
    What are the characteristic of link state routing protocols?（）
    A

    The exchange of advertisement is triggered by a change in the network.

    B

    All routers exchange routing tables with each other iIn a multipoint network.

    C

    Packets are routed based upon the shortest path to the destination.

    D

    Paths are chosen depending on the cost efficiency factor.

    E

    Every router in an OSPF area is capable of representing the entire network topology.

    F

    Only the designated router in an OSPF area can represent the entire network topology.


    正确答案： B,A
    解析： 暂无解析

  • 第12题：

    多选题
    The Cisco SDM can configure most， but not all， routing protocols. Which two of these routing protocols can be configured using SDM？ （Choose two.）（）
    A

    BGP

    B

    IGRP

    C

    ISIS

    D

    OSPF

    E

    EIGRP


    正确答案： D,E
    解析： 暂无解析

  • 第13题：

    it is belong a family of ip routing protocols，each router have a partial map of network，what is the routing protocol？


    正确答案: Class A： 10.0.0.0 --- 10.255.255.255
    Class B： 172.16.0.0 --- 172.31.255.255
    Class C:// 192.168.0.0 --- 192.168.255.255

  • 第14题：

    A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table？（Choose all that apply.）（）

    • A、RIP route 10.1.2.0/24
    • B、EIGRP route 10.1.2.0/24
    • C、RIP route 10.1.0.0/16
    • D、OSPF route 10.1.0.0/16
    • E、RIP route 10.0.0.0/16
    • F、OSPF route 10.1.2.0/24

    正确答案:B,D,E

  • 第15题：

    Which two are characteristics of link-state routing protocols?（） (Choose two.)

    • A、Routers choose a best path for a destination based on the SPF algorithm.
    • B、All routers in a given area or level build a consistent database describing the network's topology.
    • C、Routers choose the best path for a destination based on the interface on which they received the link stateadvertisement with the lowest cost.
    • D、All routers in a given area or level forward link state advertisements between interfaces in the same area or level, adding their metric to the link state advertisement's cost information when they forward it.

    正确答案:A,B

  • 第16题：

    Which  two routing protocols require a metric to be configured when redistributing routes from other protocols?（）

    • A、RIP
    • B、BGP
    • C、IS - IS
    • D、OSPF
    • E、EIGRP

    正确答案:A,E

  • 第17题：

    A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）

    • A、an OSPF update for network 192.168.0.0/16
    • B、a static router to network 192.168.10.0/24
    • C、a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
    • D、a RIP update for network 192.168.10.0/24
    • E、a directly connected interface with an address of 192.168.10.254/24
    • F、a default route with a next hop address of 192.168.10.1

    正确答案:E

  • 第18题：

    The Cisco SDM can configure most， but not all， routing protocols. Which two of these routing protocols can be configured using SDM？ （Choose two.）（）

    • A、 BGP
    • B、 IGRP
    • C、 ISIS
    • D、 OSPF
    • E、 EIGRP

    正确答案:D,E

  • 第19题：

    多选题
    Part of the job as a network administrator is being able to make a distinction between routed protocols and routing protocols. Which of the following statements is true regarding them?（）
    A

    A routing protocol is assigned to an interface and determines the method of packet delivery.

    B

    A routed protocol is assigned to an interface and determines the method of packet delivery.

    C

    A routing protocol determines the path of a packet through a network.

    D

    A routed protocol determines the path of a packet through a network.

    E

    A routing protocol operates at the transport layer of the OSI model.

    F

    A routed protocol updates the routing table of a router.


    正确答案： F,B
    解析： 暂无解析

  • 第20题：

    单选题
    You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）
    A

    static route needs to be added

    B

    floating static route needs to be added

    C

    bgp backdoor command

    D

    ospf backdoor command


    正确答案： B
    解析： 暂无解析

  • 第21题：

    问答题
    it is belong a family of ip routing protocols，each router have a partial map of network，what is the routing protocol？

    正确答案： Class A： 10.0.0.0 --- 10.255.255.255
    Class B： 172.16.0.0 --- 172.31.255.255
    Class C:// 192.168.0.0 --- 192.168.255.255
    解析： 暂无解析

  • 第22题：

    单选题
    Which of these statements accurately identifies how Unicast Reverse Path Forwarding can be employed to prevent the use of malformed or forged IP sources addresses？（）
    A

    It is applied only on the input interface of a router.

    B

    It is applied only on the output interface of a router.

    C

    It can be configured either on the input or output interface of a router.

    D

    It cannot be configured on a router interface.

    E

    It is configured under any routing protocol process.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    多选题
    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。
    A

    If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

    B

    If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    C

    If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

    D

    If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    E

    If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

    F

    If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.


    正确答案： D,B
    解析： 暂无解析

  • 第24题：

    多选题
    A router simultaneously receives all the following routes in various routing updates. Which of thefollowing routes would end up in the routing table？（Choose all that apply.）（）
    A

    RIP route 10.1.2.0/24

    B

    EIGRP route 10.1.2.0/24

    C

    RIP route 10.1.0.0/16

    D

    OSPF route 10.1.0.0/16

    E

    RIP route 10.0.0.0/16

    F

    OSPF route 10.1.2.0/24


    正确答案： D,A
    解析： 暂无解析

相关内容