Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC.

题目

Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）

A. Network B

B. Network A and Network B

C. Network A

D. neither Network A nor Network B

相似考题

1.During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?()A. incorrect distribute lists have been configuredB. missing ip classless commandC. CEF not enabledD. no default metric configured for EIGRP

2.Refer to the exhibit. Which statement about dynamic routing protocols for this network is true? ()A.No dynamic interior routing protocol can summarize as shownB.Unless configured otherwise, EIGRP would automatically summa rize the prefixes as shown in the exhibitC.With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization pointsD.The IP address design lends itself to OSPF Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy

3.Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()A. Redistribution must be enabled mutually (in both directions) to work correctly.B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.C. Default metrics are not configured under EIGRP.D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.

4.Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）A. The no auto - summary command needs to be added under router eigrp 1B. The subnets keyword was not included in the redistribute command under router ospf 1C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router AD. The default - information originate command needs to be added under router ospf 1E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF

更多“Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicat ”相关问题

  • 第1题：

    Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? （）

    A. The redistribution command should be reentered with the match route - type parameter included.

    B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

    C. The redistribution command should be reentered with the metric metric - value parameter included.

    D. Routes will first need to be distributed into another protocol, and then into RIP.


    参考答案：C

  • 第2题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第3题：

    Which statement is true,as relates to classful or classless routing?()

    A.RIPV1 and OSPF are classless routing protocols.

    B.Classful routing protocols send the subnet mask in routing updates.

    C.Automatic summarization at classful boundaries can cause problems on disc……

    D.EIGRP and OSPF are classful routing protocols and summarize routes by def……


    参考答案：C

  • 第4题：

    During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）

    • A、incorrect distribute lists have been configured
    • B、missing ip classless command
    • C、CEF not enabled
    • D、no default metric configured for EIGRP

    正确答案:A,D

  • 第5题：

    During a redistribution of routes from OSPF into EIGRP， the administrator notices that none of theOSPF routes are showing up in EIGRP. What are two possible causes？（）

    • A、Incorrect distribute lists have been configured
    • B、Missing ip classless command
    • C、CEF not enabled
    • D、No default metric configured for EIGRP

    正确答案:A,D

  • 第6题：

    Which statement is true, as relates to classful or classless routing?（）

    • A、Automatic summarization at classful boundries can cause problems on discontinuous subnets
    • B、EIGRP and OSPF are classful routing protocols and summarize routes by default
    • C、RIPv1 and OSPF are classless routing protocols
    • D、Classful routing protocols send the subnet mask in routing updates

    正确答案:A

  • 第7题：

    Which three factors have the biggest influence on OSPF scalability？（）

    • A、Flooding paths and redundancy
    • B、Amount of routing information in the OSPF area or routing domain
    • C、Number of routers with Cisco Express Forwarding enabled
    • D、Number of neighbor adjacencies
    • E、Other routing protocols in use
    • F、OSPF timer reconstruction negotiation
    • G、Redistribution with BGP neighbors
    • H、Redistribution with other IGP routing protocols， such as RIP or EIGRP

    正确答案:A,B,D

  • 第8题：

    Which statement is true, as relates to classful or classless routing?（）

    • A、RIPV1 and OSPF are classless routing protocols.
    • B、Classful routing protocols send the subnet mask in routing updates.
    • C、Automatic summarization at classful boundaries can cause problems on disc……
    • D、EIGRP and OSPF are classful routing protocols and summarize routes by def……

    正确答案:C

  • 第9题：

    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）

    • A、The router must have one routing protocol configured, but configuration for both routing protocols is not necessary
    • B、The router must hav e at least one working link connected to each routing domain
    • C、The redistribute command must be configured under EIGRP to send the routes to OSPF
    • D、The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF

    正确答案:B,D

  • 第10题：

    单选题
    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）
    A

    As numbers must be changed to match on all the routers.

    B

    Loopback interface must be configured so a DR is elected.

    C

    The no auto-summary command is needed on Router A and Router C.

    D

    Router B needs to have two network statements, one for each connected network.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    Which three factors have the biggest influence on OSPF scalability？（）
    A

    Flooding paths and redundancy

    B

    Amount of routing information in the OSPF area or routing domain

    C

    Number of routers with Cisco Express Forwarding enabled

    D

    Number of neighbor adjacencies

    E

    Other routing protocols in use

    F

    OSPF timer reconstruction negotiation

    G

    Redistribution with BGP neighbors

    H

    Redistribution with other IGP routing protocols， such as RIP or EIGRP


    正确答案： A,H
    解析： 暂无解析

  • 第12题：

    多选题
    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。
    A

    If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

    B

    If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    C

    If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

    D

    If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    E

    If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

    F

    If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.


    正确答案： D,B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. On the basis of the output, what two conclusions can be reached?()

    A. The default administrative distance has been changed.

    B. IS - IS is not enabled.

    C. Three physical interfaces are taking part in integrated IS - IS.

    D. IS - IS is not redistributing any oth er routing protocols.

    E. There are two neighboring routers sending IS - IS routing information.

    F. Address summarization is configured.


    参考答案：D, E

  • 第14题：

    Which statement is true, as relates to classful or classless routing?()

    A.Automatic summarization at classful boundries can cause problems on discontinuous subnets

    B.EIGRP and OSPF are classful routing protocols and summarize routes by default

    C.RIPv1 and OSPF are classless routing protocols

    D.Classful routing protocols send the subnet mask in routing updates


    参考答案：A

  • 第15题：

    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）

    • A、As numbers must be changed to match on all the routers.
    • B、Loopback interface must be configured so a DR is elected.
    • C、The no auto-summary command is needed on Router A and Router C.
    • D、Router B needs to have two network statements, one for each connected network.

    正确答案:A

  • 第16题：

    Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part？ （）

    • A、EIGRP will not be accepted when configured on the actual RIPv2 routers.
    • B、OSPF will no longer be used in the routing table， because you only have EIGRP internal routes running.
    • C、OSPF will no longer be used in the routing table， because you only have EIGRP external routes running.
    • D、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP external routes running.
    • E、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP internal routes running.
    • F、OSPF database will have RIPv2 routes.

    正确答案:B,E

  • 第17题：

    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。

    • A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.
    • B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.
    • D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.
    • F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

    正确答案:A,D,E

  • 第18题：

    Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology？（）

    • A、 EIGRP can summarize per interface.
    • B、 OSPF router databases remain independent.
    • C、 When they are configured with stubs， EIGRP regularly floods the topology.
    • D、 OSPF topology decisions are made independent of hierarchy or area.

    正确答案:A

  • 第19题：

    Which  two routing protocols require a metric to be configured when redistributing routes from other protocols?（）

    • A、RIP
    • B、BGP
    • C、IS - IS
    • D、OSPF
    • E、EIGRP

    正确答案:A,E

  • 第20题：

    The Cisco SDM can configure most， but not all， routing protocols. Which two of these routing protocols can be configured using SDM？ （Choose two.）（）

    • A、 BGP
    • B、 IGRP
    • C、 ISIS
    • D、 OSPF
    • E、 EIGRP

    正确答案:D,E

  • 第21题：

    单选题
    Which of these statements is true of routing protocols in a hub-and-spoke IPsec VPN topology？（）
    A

     EIGRP can summarize per interface.

    B

     OSPF router databases remain independent.

    C

     When they are configured with stubs， EIGRP regularly floods the topology.

    D

     OSPF topology decisions are made independent of hierarchy or area.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    多选题
    For a router to successfully redistribute routes between OSPF and EIGRP, which of the following are true?（）
    A

    The router must have one routing protocol configured, but configuration for both routing protocols is not necessary

    B

    The router must hav e at least one working link connected to each routing domain

    C

    The redistribute command must be configured under EIGRP to send the routes to OSPF

    D

    The redistribute command should be configured under OSPF to take routes from EIGRP into OSPF


    正确答案： D,A
    解析： 暂无解析

  • 第23题：

    多选题
    During a redistribution of routes from OSPF into EIGRP, an ad ministrator notices that none of the OSPF routes are showing in EIGRP. What are two possible causes?（）
    A

    incorrect distribute lists have been configured

    B

    missing ip classless command

    C

    CEF not enabled

    D

    no default metric configured for EIGRP


    正确答案： D,B
    解析： 暂无解析

相关内容