Refer to the exhibit. On the basis of the partial configuration, which two statements are correct? ()A. Only routes 10.0.1.0/24 will be sent out all interfaces.B. Only routes matching 10.0.0.0/8 will be advertised out interfaces other than Ethernet 0.C. O

题目
Refer to the exhibit. On the basis of the partial configuration, which two statements are correct? ()

A. Only routes 10.0.1.0/24 will be sent out all interfaces.

B. Only routes matching 10.0.0.0/8 will be advertised out interfaces other than Ethernet 0.

C. Only routes matching 10.0.0.0/8 will be advertised out Ethernet 0.

D. Only routes matching 10.0.1.0/24 will be advertised out Ethernet 0.

E. Only routes 10.0.1.0/24 will be allowed in the routing table.

F. All rout es will be advertised out interfaces other than Ethernet 0.

相似考题

1.Refer to the exhibit. Which of the following statements is true? ()A. BGP NSF awareness is enabledB. SSO for BGP NSF capability is enabledC. BGP graceful restart awareness is enabledD. 10.11.1.187 is configured as an NSF-capable BGP neighbor

2.Refer to the exhibit. A new TAC engineer came to you for advice. A GRE over IPsec tunnel was configured, but the tunnel is not coming up. W hat did the TAC engineer configure incorrectly?()A. The crypto isakmp configuration is not correct.B. The crypto map configuration is not correct.C. The interface tunnel configuration is not correct.D. The network configuration is not correct; netw ork 172.16.1.0 is missing.

3.Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1?()A. 10.10.10.16/28 onlyB. 10.10.10.16/28 and 10.10.10.64/26C. 10.10.10.16/28, 10.10.10.64/26, and 172.16.10.0/24D. 10.10.10.64/26 only

4.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

更多“Refer to the exhibit. On the basis of the partial configuration, which two statements are correct? () ”相关问题

  • 第1题：

    Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1? ()

    A. 10.10.10.16/28 only

    B. 10.10.10.16/28 and 10.10.10.64/26

    C. 10.10.10.16/28, 10.10.10 .64/26, and 172.16.10.0/24

    D. 10.10.10.64/26 only


    参考答案：D

  • 第2题：

    Refer to the exhibit. A partial routing configuration is shown. Complete the configuration so that only the default - network is redistributed from EIGRP 190 into EIGRP 212. Which ACL statement completes the configuration correctly? （）

    A. access - list 100 permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0 .0

    B. access - list 100 permit ip host 0.0.0.0 any

    C. access - list 100 permit ip any host 0.0.0.0

    D. A default -network cannot be redistributed between routing processes.


    参考答案：C

  • 第3题：

    Refer to the exhibit. Which two statements are true?()

    A. DHCPDISCOVER packets will reach the DHCP server.

    B. The router will not forward DHCPDIS COVER packets because it has not been configured to do so.

    C. This configuration is applied to interface Fa0/1.

    D. DHCPDISCOVER packets will not reach the DHCP server because DHCPDISCOVER packets are broadcasts.

    E. DHCPDISCOVER packets will not reach the DHCP server because ports 67 and 68 have not been explicitly allowed by the ip forward - protocol command.

    F. This configuration is applied to interface Fa0/0.


    参考答案：A, E

  • 第4题：

    Refer to the exhibit. On the basis of the output, what two conclusions can be reached?()

    A. The default administrative distance has been changed.

    B. IS - IS is not enabled.

    C. Three physical interfaces are taking part in integrated IS - IS.

    D. IS - IS is not redistributing any oth er routing protocols.

    E. There are two neighboring routers sending IS - IS routing information.

    F. Address summarization is configured.


    参考答案：D, E

  • 第5题：

    Refer to the exhibit. Which two statement s are correct?()

    A. All the routes were redistributed into BGP from an IGP

    B. All the routes were originated by BGP with the network command

    C. All six routes will be installed in the routing table

    D. Four routes will be installed in the routing ta ble

    E. Two routes will be installed in the routing table


    参考答案：A, D

  • 第6题：

    Refer to the exhibit. Which two statements about the topologies shown are correct?()

    A. Design 1 is a looped triangle design.

    B. Design 2 is a looped triangle design.

    C. Design 2 achieves quick convergence using RSTP.

    D. Both designs supportstateful services at the aggregation layer.

    E. Design 2 is the most widely deployed in enterprise data centers.


    参考答案：A, D

  • 第7题：

    To troubleshoot interface problems, you can use both the disable command and the deactivate command. Which two statements are correct?（）

    • A、If the interface is disabled, the logical unit will administratively shutdown.
    • B、If the interface is deactivated, the physical interface will administratively shutdown.
    • C、If the interface is deactivated, the interface configuration is ignored during commit.
    • D、If the interface is disabled, the logical unit configuration is ignored during commit.

    正确答案:B,C

  • 第8题：

    Which two of the following statements are true about HSRP load sharing?（） (Choose two)

    • A、It is achieved by using more than one HSRP group.
    • B、It is done in regards to either round robin or weight basis.
    • C、It is used to offload the active router in a certain HSRP group.
    • D、Single group HSRP is used to achieve more efficient link utilization.
    • E、The return traffic is influenced by HSRP load sharing configuration.

    正确答案:A,C

  • 第9题：

    单选题
    Refer to the exhibit. Which of these statements correctly describes the state of the switch once the boot process has been completed?（）
    A

    As FastEthernet0/12 will be the last to come up, it will not be blocked by STP.

    B

    Remote access management of this switch will not be possible without configuration change.

    C

    More VLANs will need to be created for this switch.

    D

    The switch will need a different IOS code in order to support VLANs and STP.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    多选题
    Refer to the exhibit. Which two statements are correct？（）
    A

    All six routes will be installed in the routing table

    B

    Two routes will be installed in the routing table

    C

    Four routes will be installed in the routing table

    D

    All the routes were redistributed into BGP from an IGP

    E

    All the routes were originated by BGP with the network command


    正确答案： A,B
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements about the configuration of the switch interface are correct (Choose two)（）。
    A

    The switchport belongs only to VLAN 2

    B

    Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2

    C

    The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2

    D

    A network host can be connected to this interface


    正确答案： B,D
    解析： 暂无解析

  • 第12题：

    单选题
    Refer to the exhibit. Which of the following IOS DHCP configuration statements is required so that a Cisco skinny-based IP phone can connect with CallManager?（）
    A

    ip dhcp pool Client

    B

    network 10.1.1.0 255.255.255.240

    C

    default-router 10.1.1.1

    D

    dns-server 10.2.2.2

    E

    domain-name cisco.com

    F

    option 150 ip 10.3.3.3


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. The partial configuration for an OSPF ASBR and an Area 0 ABR is shown. Assume the OSPF configurations throughout the network are operable. Which statement about these configurations is true? （）

    A. The ASBR route - maps are basically useless, because there are no deny prefix - lists.

    B. LSA Type 5s wil l not be received by the ABR from the ASBR.

    C. The OSPF backbone will not learn any RFC 1918 addresses.

    D. The matched prefix - list addresses will be given a metric of 255, which is essentially unreachable.


    参考答案：C

  • 第14题：

    Refer to the exhibit. Based upon the configuration, you need to understand why the policy routi match counts are not increasing. Which would be the first logical step to take?()

    A. Confirm if there are other problematic route - map statements that precede divert.

    B. Check the access list for log hits.

    C. Check the routing table for 212.50.185.126.

    D. Remove any two of the set clauses. (Multiple set clause entries will cause PBR to use the routing table.)


    参考答案：B

  • 第15题：

    Refer to the exhibit. Which statement is true about the router configuration that is shown ?Select the best response.()

    A. Additional DHCP options will be imported from another DHCP server.

    B. The DHCP server pools need to be bound to an interface to operate.

    C. This configuration will provide IP configuration information to two different su bnets.

    D. Additional DCHP option information needs to be imported from another DHCP server.

    E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.


    参考答案：C

  • 第16题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第17题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is provided.()

    A. The peer group shortens the EBGP configuration

    B. The peer group shortens the IBGP configuration

    C. All the configured neighbors are in autonomous system 100

    D. Three AS - path filters are applied to each BGP neighbor

    E. Only the outgoing filters are applied to BGP updates


    参考答案：B, C

  • 第18题：

    Refer to the exhibit. Which two statements are true about the partial configuration that is shown？（）

    • A、Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router
    • B、The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1
    • C、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1
    • D、DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2
    • E、The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6

    正确答案:A,E

  • 第19题：

    Which two statements about the configuration of the switch interface are correct (Choose two)（）。

    • A、The switchport belongs only to VLAN 2
    • B、Interface fa0/0 will be in both VLAN 1 (by default) and VLAN 2
    • C、The exhibit shows interface fa0/0 to be dynamically mapped to VLAN 2
    • D、A network host can be connected to this interface

    正确答案:A,D

  • 第20题：

    多选题
    Refer to the exhibit. Which two statements are correct？ （Choose two.）（）
    A

    All six routes will be installed in the routing table.

    B

    Two routes will be installed in the routing table.

    C

    Four routes will be installed in the routing table.

    D

    All the routes were redistributed into BGP from an IGP.

    E

    All the routes were originated by BGP with the network command.


    正确答案： C,B
    解析： 暂无解析

  • 第21题：

    多选题
    Which two statements regarding configuring high availabily in the Cisco UCS is correct?（）
    A

    High availability is enabled during the configuration of either HSRP or VRRP from global configuration  mode

    B

    High availability is configured during the initial setup of both Fabric interconnects

    C

    High availability can only be configured via the CMC

    D

    High availability is enabled during theinitial configuration of one of the Fabric  lnterconnects


    正确答案： C,A
    解析： 暂无解析

  • 第22题：

    多选题
    To troubleshoot interface problems, you can use both the disable command and the deactivate command. Which two statements are correct?（）
    A

    If the interface is disabled, the logical unit will administratively shutdown.

    B

    If the interface is deactivated, the physical interface will administratively shutdown.

    C

    If the interface is deactivated, the interface configuration is ignored during commit.

    D

    If the interface is disabled, the logical unit configuration is ignored during commit.


    正确答案： B,C
    解析： 暂无解析

  • 第23题：

    多选题
    Refer to the exhibit. Which two statements are true about the partial configuration that is shown？（）
    A

    Hosts connected to the FastEthernet0/1 interface will not receive DHCP replies from the router

    B

    The first DHCP client to connect to the FastEthernet 0/1 interface will receive the IP address10.10.0.1

    C

    The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.1

    D

    DHCP requests received on the FastEthernet 0/1 interface will be forwarded to 10.0.0.2

    E

    The first DHCP client to connect to the FastEthernet 0/0 interface will receive the IP address10.0.0.6


    正确答案： B,E
    解析： 暂无解析

相关内容