You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.Each computer has an 8 GB hard disk.You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C an

题目

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.

Each computer has an 8 GB hard disk.

You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.

In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.

You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.

What should you do?

A．Use Windows 2000 Professional to configure drive D as a dynamic partition.

B．Use Windows 2000 Professional to enable encrypting file system on drive D.

C．Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.

D．Reinstall Windows NT Workstation after configuring disk quotas.

相似考题

1.You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A．When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B．Disable the disk compression in Windows NT Workstation.C．Install service pack four or later in Windows NT Workstation.D．Install the distributed file system client on the Windows NT Workstation.

2.You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.You want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B．Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C．Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D．Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.

3.You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.You notice that users can still save files to drive D.You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?A．Use Windows 2000 Professional to configure drive D as a dynamic volume.B．Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.C．Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.D．Reinstall Windows NT workstation after configuring the disk code task.

4.The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A．Create a Windows Group Policy that denies user access to My Network Places.B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.

更多“You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.Each computer has an 8 GB hard disk.You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C an”相关问题

  • 第1题：

    You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.

    You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.

    What should you do?

    A．On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.

    B．On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.

    C．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.

    D．Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.


    正确答案：A
    解析：Explanation:ToinstallaWindows2000computerasadomaincontrollerinaWindowsNT4.0domain,wemustfirstinstallWindowsNT4.0thecomputerasaBDCintheWindowsNT4.0domainandthenpromotetheBDCtoPDC.WemustthenupgradethemachinetoWindows2000Server.WhenupgradingthedomaincontrollersinaWindowsNTdomaintoWindows2000,wemustupgradetheprimarydomaincontrollerfirst.Incorrectanswers:B:ThecomputermustbeinstalledasBDCandthenlaterpromotedtoPDC.C:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.D:ThecomputermustfirstbeinstalledasaWindowsNT4.0BDCandthenpromotedtoPDC.

  • 第2题：

    You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional. What should you do？（）

    • A、 When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.
    • B、 Disable the disk compression in Windows NT Workstation.
    • C、 Install service pack four or later in Windows NT Workstation.
    • D、 Install the distributed file system client on the Windows NT Workstation.

    正确答案:C

  • 第3题：

    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

    • A、Disk Management
    • B、Services and Applications
    • C、Removable Storage
    • D、Device Manager

    正确答案:A

  • 第4题：

    You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）

    • A、Format the dynamic volume as a FAT32 partition.
    • B、Format the dynamic volume as a FAT16 partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and format the volume as NTFS.
    • E、Configure Disk 2 as a basic volume and format the volume as FAT32.

    正确答案:D

  • 第5题：

    You have a netbook computer that runs Windows 7. The computer has a single 30-GB partition that has 10GB of free space. You need to create a system image of the computer by using Windows Backup. You mustachieve this goal by using the minimum amount of time.  What should you do first?（）

    • A、Attach an external hard disk.
    • B、Attach an external DVD burner.
    • C、Convert the local hard disk to a GPT disk.
    • D、Create and attach a virtual hard drive （VHD）.

    正确答案:A

  • 第6题：

    You are a network administrator for ExamSheet.net.  You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows  NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit.  What should do? （）

    • A、Create the boot drive on drive C and format as a FAT16 partition. 
    • B、Create the boot drive on drive C and format as a NTFS partition.
    • C、Configure the boot drive as a basic volume and format the volume as FAT32.
    • D、Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. 
    • E、Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.

    正确答案:A

  • 第7题：

    You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

    • A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
    • B、Use Windows 2000 Professional to configure drive C as a dynamic partition
    • C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
    • D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

    正确答案:D

  • 第8题：

    You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）

    • A、Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.
    • B、Configure Disk 2 as a dynamic volume then format as an NTFS partition.
    • C、Configure Disk 2 to use Encrypting File System （EFS）.
    • D、Configure Disk 2 as a basic volume and forma the volume as FAT32.

    正确答案:A

  • 第9题：

    单选题
    You are a network administrator for ExamSheet.net.  You plan to configure your computer to use Windows 98, Windows 2000 Professional and indows  NT Workstation 4.0. You also plan to configure a data drive that can be accessed by all operating systems on your computer. Your computer has one 20 GB hard disk. You want to configure your computer as shown in the exhibit.  What should do? （）
    A

    Create the boot drive on drive C and format as a FAT16 partition. 

    B

    Create the boot drive on drive C and format as a NTFS partition.

    C

    Configure the boot drive as a basic volume and format the volume as FAT32.

    D

    Configure the boot drive as a dynamic volume and format the volume as a FAT16 partition. 

    E

    Configure the boot drive as a dynamic volume and format the volume as a FAT32 partition.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    You are the administrator of Company's network. You have configured your computer with a dual-boot configuration. The computer uses both Windows 2000 Professional and Windows NT Workstation 4.0 with the latest service pack. Your computer is equipped with three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You wish to use Disk 2 to store your project files on. You partition Disk 2 and configure it as a dynamic volume in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files. You want to be able to access your project files when using either of the operating systems.  What should you do?（）
    A

    Format the dynamic volume as a FAT32 partition.

    B

    Format the dynamic volume as a FAT16 partition.

    C

    Configure Disk 2 to use Encrypting File System （EFS）.

    D

    Configure Disk 2 as a basic volume and format the volume as NTFS.

    E

    Configure Disk 2 as a basic volume and format the volume as FAT32.


    正确答案： E
    解析： 暂无解析

  • 第11题：

    单选题
    You have a computer that runs Windows XP. The computer has one basic disk that contains a single partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need toinstall Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk (VHD). What should you do first?（）
    A

    Create a second partition.

    B

    Shrink the primary partition.

    C

    Convert the hard disk to a GPT disk.

    D

    Convert the hard disk to a dynamic disk.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）
    A

    The required result cannot be obtained with the above given solutions

    B

    Enable EFS on D

    C

    Format the NT 4 partition and reload NT 4

    D

    Use NT 4.0 NTFS permissions to deny users write access to D


    正确答案： D
    解析： You should use NT 4.0 NTFS permissions to deny users write access to D.This can prevent users from saving files from windows NT 4.0.             
    Choice “Enable EFS on D is incorrect” because NT 4.0 does not support EFS.  
    Choice “Format the NT 4 partition and reload NT 4.0” will remove MBR and system partition （booting files） of windows 2000 professional.

  • 第13题：

    You are the administrator of Ezonexam.com's Windows 2000 network.

    Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.

    You want to be able to access your project files when using either of the operating systems.

    What should you do?

    A．Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

    B．Configure Disk 2 as a dynamic volume then format as an NTFS partition.

    C．Configure Disk 2 to use Encrypting File System (EFS).

    D．Configure Disk 2 as a basic volume and format the volume as FAT32.


    正确答案：A
    解析：Explanation: Windows 2000 Professional uses the NTFS 5.0 file system while Windows NT Workstation 4.0 uses the NTFS 4.0 file system. Windows NT Workstation requires Service Pack 4 or later to be able to use the NTFS 5.0 file system.

    Incorrect Answers:
    B: Configuring Disk2 as a dynamic volume that is formatted as an NTFS partition will not ensure that you will be able to access your project files when making use of either operating system.

    C: The Encrypting File System allows you to encrypt files on an NTFS volume so that only you can use them. This offers a level of protection beyond that provided by NTFS permissions, which you can use to restrict access to your files by others who log on to your computer. However, this does not grant access to files if the computer is configured as a dual booting system.

    D: This option will not solve our problem, what you need to do is to upgrade to Windows NT Workstation 4.0 to Service Pack 4 or later.

  • 第14题：

    You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permission
    • D、Reinstall Windows NT Workstation after configuring the disk quotas

    正确答案:C

  • 第15题：

    You are the desktop administrator for your company's sales department. Susan is a user in the sales department. Susan's computer currently runs Microsoft Windows NT Workstation 4. 0.  Susan uses a legacy application that is compatible with only Windows NT Workstation. You want to install Windows XP Professional on Susan's computer. You plan to set up a dual-boot configuration so that Susan can run either Windows XP Professional or Windows NT Workstation. Susan's computer has two hard disks, named drive C and drive G. You install Windows XP Professional on drive G. After Windows XP Professional is installed, Susan reports that Windows NT Workstation is no longer available. You need to ensure that both operating systems are available on Susan's computer. What should you do?（） 

    • A、Insert the Windows XP Professional CD-ROM into the computer. Run the Sfc.exe /scannow command.
    • B、Insert the Windows XP Professional CD-ROM into the computer. Run the Winnt32. exe /cmdcons command.
    • C、Start the computer by using an MS-DOS bootable floppy disk. Run the Attrib.exe -r -h -s c：/bootsect.dos command.
    • D、Start the computer by using the Windows XP Professional CD-ROM. From the Recovery console， run the Bootcfg /rebuild command.

    正确答案:D

  • 第16题：

    You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic volume
    • B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
    • C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
    • D、Reinstall Windows NT workstation after configuring the disk code task

    正确答案:C

  • 第17题：

    You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）

    • A、Use Windows 2000 Professional to configure drive D as a dynamic partition
    • B、Use Windows 2000 Professional to enable encrypting file system on drive D
    • C、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission
    • D、Reinstall Windows NT Workstation after configuring disk quotas

    正确答案:C

  • 第18题：

    You have a computer that runs Windows XP. The computer has one basic disk that contains a single partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need toinstall Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk (VHD). What should you do first?（）

    • A、Create a second partition.
    • B、Shrink the primary partition.
    • C、Convert the hard disk to a GPT disk.
    • D、Convert the hard disk to a dynamic disk.

    正确答案:B

  • 第19题：

    Your computers have both Windows NT Workstation 4.0， and Windows 2000 Professional operating systems. You configure the hard disk on each computer to have two 4-GB partitions. Windows NT Workstation is installed on drive C， and Windows 2000 Professional is installed on drive D. You configure a disk quota on drive D to prevent users from saving data on the disk.  How can you prevent users from saving files to drive D in either operating system？（）

    • A、The required result cannot be obtained with the above given solutions
    • B、Enable EFS on D
    • C、Format the NT 4 partition and reload NT 4
    • D、Use NT 4.0 NTFS permissions to deny users write access to D

    正确答案:D

  • 第20题：

    You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? （）

    • A、 Run Check Disk in Windows NT Workstation 4.0.
    • B、 Disable disk compression in Windows NT Workstation 4.0.
    • C、 Install Service Pack 4 or later for Windows NT Workstation 4.0.
    • D、 Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.

    正确答案:C

  • 第21题：

    单选题
    You are the administrator of Company.com’s Windows 2000 network.   Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.  You want to be able to access your project files when using either operating systems.   What should you do?（）
    A

    Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.

    B

    Configure Disk 2 as a dynamic volume then format as an NTFS partition.

    C

    Configure Disk 2 to use Encrypting File System （EFS）.

    D

    Configure Disk 2 as a basic volume and forma the volume as FAT32.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    You want to configure your Windows NT Workstation 4.0 computer Company1 to run both Windows NT Workstation and Windows 2000 Professional.  What should you do before installing Windows 2000 Professional on Company1? （）
    A

     Run Check Disk in Windows NT Workstation 4.0.

    B

     Disable disk compression in Windows NT Workstation 4.0.

    C

     Install Service Pack 4 or later for Windows NT Workstation 4.0.

    D

     Install the Distributed file system （Dfs） client in Windows NT Workstation 4.0.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You are the desktop administrator for your company's sales department. Susan is a user in the sales department. Susan's computer currently runs Microsoft Windows NT Workstation 4. 0.  Susan uses a legacy application that is compatible with only Windows NT Workstation. You want to install Windows XP Professional on Susan's computer. You plan to set up a dual-boot configuration so that Susan can run either Windows XP Professional or Windows NT Workstation. Susan's computer has two hard disks, named drive C and drive G. You install Windows XP Professional on drive G. After Windows XP Professional is installed, Susan reports that Windows NT Workstation is no longer available. You need to ensure that both operating systems are available on Susan's computer. What should you do?（）
    A

    Insert the Windows XP Professional CD-ROM into the computer. Run the Sfc.exe /scannow command.

    B

    Insert the Windows XP Professional CD-ROM into the computer. Run the Winnt32. exe /cmdcons command.

    C

    Start the computer by using an MS-DOS bootable floppy disk. Run the Attrib.exe -r -h -s c：/bootsect.dos command.

    D

    Start the computer by using the Windows XP Professional CD-ROM. From the Recovery console， run the Bootcfg /rebuild command.


    正确答案： B
    解析： 暂无解析

相关内容